I could not help but print out this morning replies to my post and give to FIL in church. The smile on his face said it all. Thanks so much.
Chuck
Type: Posts; User: Chuck Hanger; Keyword(s):
I could not help but print out this morning replies to my post and give to FIL in church. The smile on his face said it all. Thanks so much.
Chuck
Guess that I have to express a little gloat here. Last summer my FIL was in my shop and made the statement that he sure wished he still had a lathe to create things on. While I do not have a lathe I...
Always mess it up. Another try.52830
Darl,
I have the M12V mounted perminately in a cabinet that I built. Bought the top and plate from a well known supplier. Wanted the 3/8 plate and leveling screws of their design. Living in a...
I would have to say that I have read enough about Saw Stop. Even watched the videos. Still have not seen what would happen in a "real life experience" as ramming that HOT DOG into the blade like it...
Hi John,
2.5% of $2000 is $50 I think. Do they charge for going and coming also?
Chuck
http://images.grizzly.com/grizzlycom/catalog/2006/main/0107_01.jpg
Craig,
Finished mine (designed from about 5 different ones) about 3 months ago. Really takes routing to a new level of ease.
Enjoy,
Chuck
Thanks for the tip Ralph. Not that far from me right across 47. Probably only 55 to 60 miles. I live just NW of Bellefontaine.
Thanks,
Chuck
Live about 60 miles NW of Columbus, not a bad drive straight down 33. I have looked for woodworking clubs in the area but have not found any (to rural). I am sure that there are other mills here in...
Thanks for the link Derek. Will check it out.
Yes Robert and just think for another 2.15 a bf I could have had maple:eek:
I agree about the lumber yards in Ohio as well as plenty of woods. Just...
Went to a local hardwood supplier today here in west central Ohio. Very nice fancy facility. Still travel in the old style horse and buggy, but a very large diesel engine running a generator. ...
Boy you guys sure don't have any mercy on us oldies:) . Trying again just to show off my finest bowl in 44 years.
Chuck
http://www.sawmillcreek.org/showthread.php?t=45389
I guess that it will...
I have had my DW 735 for a couple of years now. I usually only take 1/16 at a time. Have messed up one time while running some 8" walnut taking 1/8". Really gave it a work out when it came to a...
Why does everything vanish if you search for something for referal? Then you have to retype everything. Also sure wish MS had their explorer 7 somewhere besides in my computer.
Chuck
Only 97 KB should be there. Says that I already attached?????? I give up:mad:
Chuck
With me running the controls.:confused: Try again.
I feel hurt that Andy didn't even give me a "attaboy" for my first bowl in 44 years:rolleyes: Oh well really enjoy all of the help that you folks have taken the time to help me.
Thanks all,
Chuck
I would have to agree that the Griz not lining up by 1/2" would have to be a fluke of some kind and have to agree with you Frank that price sure is tempting. I know that 9 out of 10 suggestions have...
Thanks Guy,
I have really never ran the T/G bits. They are the CMTs and sure seem sharp. I will at least try the one pass and then a final light cut.
Thanks,
Chuck
I am getting ready to do T/G 1/2" deep on about 40' of pine. Have 3 1/4 HP router in table. Can you give me some hints on the number of passes that I should make?
Thanks,
Chuck
Can't tell you all how much I appreciate taking the time to pound a little education into my dense head.:)
Thanks a million,
Chuck
Travis,
I have watched your wonderful work regularly. Fabulous is the best that I can say. What tools and chucks, etc that I would need to be able to do just some decent things?
Thanks,
Chuck
I built this one for under $200 and has worked out very well. On rollers so I can move it very easily. I will say that the walnut face came out of my front yard. Cut 5 walnuts out of the yard when...
Thanks to all that have responded. I guess that what I need to know is what I should be looking for in a price range that I can afford. Can't really afford a bare machine that costs $1000 and then...