To the original question, I would say it's possible but unlikely.
I'd wager you'd get 1 7/8 and 1/2" parts, but unlikely you'll get 3/4".
I think you Resaw at 2 1/8 or even 2 1/4 to be safe....
Type: Posts; User: David J Blackburn; Keyword(s):
To the original question, I would say it's possible but unlikely.
I'd wager you'd get 1 7/8 and 1/2" parts, but unlikely you'll get 3/4".
I think you Resaw at 2 1/8 or even 2 1/4 to be safe....
I've had one for a couple of years now; I find that if I am running a wide board through (more than 8-10" or so), it cannot take much of a cut at all. Very consistent with what you've said. I've...
This is his #1. He’s concerned about making the box joint cuts on the narrow part after doing it, because his board isn’t flat. At least, if I’m reading his concern right. The video he links to in #1...
I’d go with #1. If you are worried about the strength of the glue up when cutting the box joints, use a backer board tightly clamped to the front to give it more support and should keep you from...
Yes, this. I said the same thing the other day, but I wouldn't fiddle with the settings based on what's in those pictures. You're likely to make things work. You have a board with a lot of cupping...
Late to the game maybe, but based on those pictures, nothing seems to be wrong. In the 4th picture, the board is resting flat on the jointer bed through the first 1/3 or so, then raised, then...
Happened to me. No idea why - it didn’t snap completely, so I trimmed it down and put it back on (so I could finish what I was doing) and it has worked fine since. I did order a replacement on...
So - follow up -
That paint is the thickest paint I’ve ever seen, and I’m having a lot of trouble applying properly. Any hints? I’m using a nylon brush and it looks awful.
I am not a pro at...
Awesome, thanks for the advice.
Hey all -
Looking for some finishing/paint/sealer advice. I’m replacing the vanity in a half bath (powder room?) and have built a new vanity as a simple MDF carcass with a popular face frame and...
Don - I PM’d you. I’m in Bethesda. Not a big window due to work travel, but if you can swing by tomorrow during the day, I can help.
Hey - what did you use for the clamp racks? Are those just 12” hooks or something?
It is, as a matter of fact. The Feb 18 issue is out already.
Just to be clear, the MJ splitter is *NOT* a riving knife. It's a splitter. You can't use it on non-through cuts (unless it's a very deep non-through cuts) and you can't use it on non-90 degree...
Axminster tool makes a jig that does the the same thing and is a bit cheaper. I ordered it direct from them in the UK, but I think they now sell it at Lee Valley too. Cheaper than the woodpecker...
A 3hp machine should be good at 20 amps, and a 5hp machine should be good with 30 amps, so you should be fine to run a 3hp DC at the same time as any of the other tools. Unless you outfitted your 66...
Youve got 220 coming from the pole, for sure. With the proper wire and breaker size, you'll get 5hp. Without the right breaker size, you'll pop the breaker and without the right wire size, you risk...
Holben gives free shipping and 10% off the standard Byrd prices. They don't take the SMC membership discount on the Shelix heads. But it's still a good deal.
Domino (bought used at like 70%)
Ets 125
Forex 90
TS55 with two rails
Ct26
I keep thinking about a jigsaw, but I can't justify it, because the cordless Bosch I have works well enough. Would...
Yes. I live in DC and feel like driving down there to get it would be a reasonable thing to do. Go grab it
I had the exactly same. Added the Woodpecker lift and PC7518 motor, add use my Bosch (1617/18) in hand now. Huge improvement with the lift.
I've had that for a while. It works. I also just bought a lift because "It will work. You won't like it, but it will work." Is the truest thing ever said.
A jointer isn't complicated. If you can get the tables coplanar, then its a great deal. If you cant, then it's not.
A question, as I think about getting a similar unit. What did the external hepa filter kit cost?
Being a litigation attorney is more lucrative than most jobs, yes.
There are no damages available as a remedy in the ITC. If SS wins in a patent suit in district court - which would likely also...