Search:

My long term plan is to get a SawStop PC saw and have the router table built into the right side.

I am wondering if I can get the in-line router table first and use it stand alone, than add it to...

Thanks for all of the great advice and info!

I usually keep a 1/4" 6 TPI blade on my Delta 14" bandsaw because I thought it seemed to work fine for most general purpose tasks I do with the saw. Today I was ripping down some redwood 2x4 material...

Hi All,

Thought I would get y'alls opinion about how to go about creating a door/floor for an opening in the floor for a set of stairs in my mudroom. These are stairs that appear to be old cellar...

Hi All,

A bit off topic from wood working, but I know you all probably have some good thoughts on my dilemma:

I am going to paint the exterior of my house. I was going to buy a Wagner airless...

Anybody ever used a X-Y cross slide vise ($50 version from wherever) to cut mortises on the Drill Press, like a milling machine?

I am looking at doing some 3/8" wide mortises in African Mahogany,...

Anybody have any experience with the Ryobi 18 volt cordless handplaner? It is the cheap One+ system from the Despot.

Does it work well enough for occasional use to plane doors and whatever?

I...

I am about ready to install new base and wall cabinets in my kitchen. The problem is that the floor and the almost parallel-to-the-floor ceiling slope downhill on the order of 2 inches for the 10...

Try Googling Colorado Woodworkers Guild.

I just picked up the Rockler ~$90 tenoning jog and it is kind of a POS. Not very rigid and generally not impressive.

Is there any difference between this jig and the more expensive Delta or maybe...

I am toying with the idea of turning a portion of my shop space into a "clean room" (as dust free as possible) for finishing and other such endeavors. I am thinking of something like a really big...

The remaining flooring is hardwood strip flooring, with the strips and grain running straight out of the wall.

What is the best way to cut and remove the 1.5" inch wide strip of wood flooring that is left at the junction of the floor and toe plate of the wall after I cut the rest with a circular saw? My...

Bump, Bump...

Anyone know of a source for metal (steel or aluminum) drafting templates for drawing (or wood burning) circles or ellipse?

Thanks.

The Girlfriend has requested a Jewelry Stand, not a Jewelry Box. Anybody know of a good source for a design or maybe even some pics. I am coming up pretty blank on Google.

Thanks.

On my 14" Delta Bandsaw, I have a lever that allows me to release the blade tension very easily. Thus far, I have been releasing the tension if I am not going to be using the saw for a few days. Is...

Tage Frid books are great! I am agreed on the hand down value of these books, as mine were my Dad's. I just built a variation of his Dutch Pullout Table.

I'll throw my chips in for the Ridgid TP1300. Works great, relatively common from the Despot or Craigslist. Makes boards thinner with no hassle.

Sweet. The Rider is obviously stoked. Also cool that you made it with 2x4 stock.

Buffalo tools, anybody...

Anybody ever had any luck pressing the sawdust into bricks with some sort of binder (water, wax, coca cola...) and then burning them in the fireplace?

Anybody know much about Buffalo tools? I have a line on a Buffalo 6" jointer.

Thanks.

I know, I know; boo, hiss, metal working.

Does anybody know of a good forum for metal working? I am really impressed by the good vibe and positive input here on SawMill Creek. How about a...

I've done a SMC search and am still wondering, what is the best 8" dado blade setup? In your opinion.

Thanks