Search:

I'm going to make a new larger top for my outfeed table. I know to use a 20 mm bit. Festool used to make a router bit, but per a phone call to corporate this is no longer sold in the USA.

I'm...

I've listened to pandora, amazon, and google. I don't have a paid subscription to any these services. I'm tired of the commercials and it cutting off after an hour or two. Any service that I can...

Anyone built something like this?

Just did the math:
55 gallon barrel is 7.35 cubic feet
4*4*4 foot cube to collect is 64 cubic feet.

I would use my tractor with forks to empty it. Just...

9" is the bottom opening.

I have 2 grizzly 2 hp cyclones. They both currently have 35 gallon drums that were supplied with them. I am tired of constantly emptying the bin midproject woth milling stock on the jointer and...

So to be clear, stub up 3/4. Once poured, cut off flush. Attach a plastic box and they cable/or flex metal conduit? Good idea about the airlines!

I'm going to be pouring the slab in a month in the 40*60 man cave. About half will be woodshop. I'm still not quiet set on floor plan, but an close. Going to run sch40 pvc conduit under slab. Thought...

I can or my Deere certainly can.

I have 2 grizzly 2 HP cyclones. Long story.

They come with small canisters, and I can fill one in VERY short order with the 20" planer and 16" jointer running. I am going to increase to a 55 gal...

Woodcraft has a sale this weekend, and I am wanting to get set up to turn some pens.

Questions for the masses.....

What do I need to turn out some pens (I've just turned spindles and bowls in...

I have a Leigh D4. I also have several dovetail saws. Haven't used the jig in 3 years. Take a class from someone who knows how to cut dovetails and you will be off, and a lot cheaper too (even if...

Jim,

where are you located? I have a 0490 with a spiral head that I may need to unload in the near future.

Thanks. Will do. Also going to add a power feeder.

I've been looking for a "smaller" shaper for a while. I have a monster that can't make it into my basement shop. (My friends draw the line at 1,500#)--wimps! So I picked this one up from a local guy....

I have a 37X2 in a basement also. Good luck. I wold also be interested.

Kent,

I was just talking to a friend (jewler) about pewter inlay. Any tips, photos, or resources would be much appreciated!!!

Also, I have seen sulfur inlay. It doesn't pick up colors.

I was also told that holly doesn't pick up color like other woods due to its density. Is that true?

Thanks for the tips.

Anyone try the one from Joel at Tools for working wood?

I like the crock pot idea!!

I am transitioning from "Yellow glues" to hide glues. Wanting to go a bit more period.

Where did you get your glue pot? Any suggestions or things I need to look out for?

Thanks.

I am starting my journey down the inlay road.

I have a foredom with a stewmac base and edge guide. Just bought the brass to make up some handtools. Bought Steve Lata's DVD and did a hands on...

Attended WIA last week and picked up some of Dave Jeske’s handiwork…
I talked with my dad and he wants to put the fine steel of blue spruce to the test. Problem he lives in Iowa. So, I need a tool...

I pimped my cyclone. Had a dust pan made at a local shop. No need for the plastic bags. Cut out a plywood top with a clear plexi hole to see when I am almost full. Added the metal insert to use with...

Todd,

Where are you located. I returned one to woodcraft, due to a defect and got another one (brand new). I am not going to be using it, as I have a few others. If you are close, maybe I can...

I have a MM16 with the 3.6HP motor. I am going to upgrade to a carbide blade. First does anyone have a 1" carbide on this saw? Is it possible to properly tension it or will I have to go down to...