Search:

Hello, I would say it would depend on what drawer guides you want to use, if under mount just staple bottom to sides. Side mount guides need the dado and 1/2" bottom would be best on wider drawers. ...

Hi Brody, We dado the front and sides of our boxes and staple to the back end of the box 1/4" ply is fine since the bottom is supported by the guides you could glue a stiffener to the center of...

Hi Brain, in oregon building code requires a continuous footing around the perimeter of the building, are you going to use compacted fill under the slab or round rock? Fiber is a great product ,...

take a look at this site http://www.danzcoinc.com/html/chain_saw_sprockets.html I have been considering the same thing and found the hydraulic motor quite interesting.

Hello, Just a thought on the cheap side if you have time you could build the bends by making them in sections like the way they would be made at a welding shop ie,10 degree sections screwed together...

Thanks for the replies, of course my next question is how should I clean this plane up with out ruining it. The blade is rusty and the wood is quite dusty and dirty. Thanks Jay

Hello everyone, was just wondering if d r barton from rochester ny made hand planes I have just picked one up, it also has 1832 stamped on it. thanks Jay

We did win a battle against this guy earlier, he tried to require us to install a sprinkler system but if your shop is smaller than 2500 sq ft in wood working area and you don't store materials over...

Thanks for the replies, this is just the latest in the long list of issues the fire marshall has came up with ,he also needed to know the cfm needs of each piece of equipment along with a dust...

The local fire marshall wants to see documentation that a metal dust collection system doesn't require a ground. Does anyone know where i could get that info .Thanks Jay

Thanks for the replies! the guys that used this before didn't realize it should have some shims under sleeves they just tried to over tighten the bolt,and it has been used so long like this that the...

Just got a used delta boss sander but it has a couple of problems with it so was hoping for some good advice. The bolt that holds the spindle backing and sandpaper won,t tighten down enough to keep...

Hi please make sure to use latex based glue or adhesive caulk petroluem based products are not compatable and will dissolve the foam. sometimes experience is the best...