Search:

I'll try that. Out of curious it's what do you remember paying for a new fan? I wonder what a replacement shroud would be (used is fine).

I think we have a winner.

Thanks Jerry. But if that were part of the brakes does that mean it didn't have the fan shrowd or it ran with it off?

I don't know what you normally see when you take off the cap but there's about an inch shaft when I took the knob and fan blade off. It is TEFC, does the fan really cool anything down? Anyway,...

I've inherited an electric motor but what's this gear on the non arbor end? I know the fan cap was removed but what's on the end?
332965

"my question my have no answer here."
Not sure what you're trying to say here but yes, it was just for a bearing replacement. It's done now, and I do use the rollers just a hair, no sniping "if...

285372
I got the shafts out by banging away using vise grips to hold the bolt end and hammering outward with a small crowbar on the vise grips themselves. They survived. The part that was tight...

285004

They're all identical but it doesn't mention how to remove them.
There doesn't seem to be a way to lock the roller from rotating. I tried using
the set screw on the other end to hold it...

Does anyone know how to remove the table roller from an average 15" planer? I see a bolt on either end of the roller on the side of the casting but when the set screw is loosened and the bolt turned...

Anyone know if there's a video or website with pictures of how to change the oil in the gearbox or add oil in the top for the indeed roller? I think you need to remove bolts on the top? I have a...

I thought of a combo machine, it would be nice but I dont have the $1000 or so extra to invest. My only two options is to keep one or the other. I've also looked into Grizzly and other combos. ...

I have a small weird shaped shop so I have to be careful on the machines I choose but lets talk about the planer.
I have an L shaped shop and the jointer and planer go into that hall area for...

Will the spokeshaves have the new blades? I was planning on getting the set but didn't know if I should wait or not.

Agreed, oil is a bad idea. I brushed on some poly, I just wanted a finish for the cherry to give it a warm natural look.

I finished building a dresser with 2 half and 2 full sized drawers. The case and drawer fronts are red oak dyed dark brown and finished with satin poly.

The drawer boxes are cherry, so far...

I went with the TS75, I don't use it all day so I'm not concerned about the weight. I knew one day I'd be cutting thicker material and would kick myself for not spending a little more to get the...

The O2 metal versions are out, powdered metal to follow. What do you think?

http://www.leevalley.com/en/wood/page.aspx?p=69619&cat=51&ap=1

Will there be a 1/8th size chisel?

James, can you post some close up pictures of your problems? What type of wood? Do you see any obvious issues with grain pattern? Is the bit splitting/cracking the edge downward as you cut?

Someone locally is selling a Festool ATF 55e for $300, I'm not familiar with the Festool history but is this before the TS 55e? How old would this be and what's the difference between the ATF and...

Weird, I think I meant to say ceramic.

Nope, I never said Shaptons, just Bester and Imanishi. I'll have to try and find info directly related to Besters I guess, I don't want to ruin my stones before I even use them. They've been dunked...

I don't have shaptons, Bester and Imanishi. You said you don't want to soak them, why not? This is the info I'm looking for, is there a reason I shouldn't soak them like it's bad for the stone?

I bought a set of shapton stones (700, 2000) and the Imanishi (8000) stones after selling my worksharp 3000 - I've decided to jump in the water and force myself to sharpen via stones.I've yet to use...

I'm getting the Rockler woodturners apron very soon, I like how it's very high at the top to keep dust off my shirt and neck. Leather too, I think dust would get in the canvas right?...