Search:

My old Asturo BRP hvlp has had it. Parts are no longer available, so it's time for a new gun.
I'm looking at 2 sets. The guns are the same, but one is only hvlp and the other has both hvlp and hte...

The jointer is 3 1/16" high. I embedded a 1/2" threaded cross dowel for the height adjuster before laminating the sides. The lateral adjuster is 1/16" plate and isn't worth using. I adjust laterally...

Hi Leigh
Hope this works. I'm not sure how to post pictures, but here goes.

These probably don't give enough information, but if you want me to I could make a drawing and email it to you. The...

I'm out of town for 2 days. but if you'd like I can post the dimensions of my Primus jointer as soon as I get back. I copied the adjustment mechanism to build a version of the ECE Primus type...

142538

I still like my ECE for some things but it can't touch the LV jointer. The LV mouth is easy to adjust, it's easy to hold, it has a great heft, and with two blades, I can use a normal 45...

Thanks Steve

I will be using water base dye as a ground color on an alder project seal and glaze. I have taken a large test piece that appeared to have some fairly wild grain, flooded on some Transtint, and wiped...

Just read a sharpening article by David Charlesworth that says he grinds bevels at 23 deg. .

Even with my Lee Valley grinder tool rest and angle setting gauge I can't hit my desired angle within...

Hi Ralph;
Here's how I did it. A weekend's work but well worth it. I probably catch 90% of the dust from my saw.
Hope the pictures turn out, this is my first try.
I also rigged up a simple little...

Wow

You've all loaded me with ideas. Thanks again.

JC

Zahid

A couple of years ago I took a Lee Valley gents saw, filed the teeth off and then filed new rip teeth (12 ppi) according to instructions on http://www.norsewoodsmith.com, which is a...

Hope I'm doing this right.

Thanks for the input and for throwing out the welcome mat.

The picture Wes showed from Wood Central is the guard I was referring to. I was intending to mount it to...

I'm getting ready to build an overarm guard with dust collection, for my table saw, based on the design by Gordon J Sampson.

I would like to be able to lift the guard higher than that design...