Search:

I restored a delta 890 with a retro cast iron stand,came out very nice.I have one of the last 66's made,If it wasn't such a pain just setting up a table saw I would seriously consider a saw like you...

I have the g0453z with helical head,it does a great job,you will need good dust collection I can fill up a 32 gallon garbage can in no time at all.

Check the amp draw under load and no load,there should not be a significant difference,as listed on motor plate.If amp draw is high,possibly motor is laboring due to unusually high belt tension or...

I bought a used dj20 paid 800.00 for it then I installed a grizzly carbide head on it.Keep in mind most machines are made in the same factory painted different colors,some colors cost more than...

Tom I can only marvel at your organized shop something I need to do,Scott and the others thanks for the response.I have decided to build my own bench,having come back to reality.My shop is 11x30...

Space is a factor,half of my basement of 1100 sq ft. house.Good point of material larger than grate opening.How would non fein or festool tools power up those vacumes?I do have a clearvue cyclone...

I am considering the Woodmark downdraft workbench.Does anyone have any experience with this company?Also interested in the Len Hovarter twin screw vise.The web site for the workbench is...

Those of you who classify american workers as lazy shame on you,yes there are lazy people in all walks of life,I have seen them and so has everyone else but to generalize is like saying anyone who is...

Tim sounds like bearing problem?,or is the belt too tight?.Take the belt off cutterhead should move freely as well as the motor when you hand spin it.Do not keep using your jointer with it making...

I am in process of installing grizzly T10126 spiral head.I just aquired jointer a few months ago,some of you we,re helping me find it.Long story short I spent several hours cleaning below outfeed...

I had a byrd head and did torque screws down what I had trouble with was keeping screw head centered in cutterhead as I was torquing screw.I just aquired grizzly spiral cutterhead for my dj20 because...

I have been in contact with Erik about minimax,but really having hard time thinking of spending $3000.00 by the time I pay for shipping.Those of you who have g0514x2b or the g0566b are you happy with...

whoops should have said I was considering 8in. jointer

Shiraz
Great product videos you have,I have the g0453z planer what a great machine.I would have bought 8in. planer but found used delta dj20.I will be buying one of your carbide heads from you I am...

These name brands are relying on a history that no longer exists,there was a day I would only buy American but I had to give that up now I just try to get biggest bang for the buck and still try and...

I will be buying a band saw in the future 16in. will be smallest,probably a grizzly would prefer Italian but those are probably out of my price range.Van Huskey made a comment about avoiding combined...

Jason
I have samething I drove 8 hrs. a day in work van doing hvac for utility I worked at with no AC. it would get to about 115f inside so I would open the window, wind noise did me in started...

I will be purchasing triton tra001 router had some concerns,I talked with Stacy Peterson at Avail Distribution he answered my concerns.He also informed me if anyone is having an issue with the...

That is good to know thanks

Apparently i gave the wrong web site for a different take on table saw fence here goes again.WWW.vsctools.com here is web site for extrusion supplier www.8020.net.Yes fence is another biesmyer...

Mike I do not remember what they are called but when the wind whips the wire, those devices in theory are supposed to help dampen wire oscilliation

Here is a picture of my jointer 251233

I do not know if this is proper but I found a really nice website supercooltools.com check it out.I also have the website for the alum. extrusions they use 8020.net I am not connected with these...

I have been cleaning my new old jointer up last couple of days,and tightening loose bolts back up.My DJ20 does indeed have a magnetic switch of which I found several loose connections.The infeed bed...

I just picked dj20 jointer made in taiwan,I have not had a chance to use yet and I know pictures are expected but I am not that savvy yet and my wife just left for a trip.My computer skills are very...