I appreciate the reply's . I haven't started but I picked up a blank of 2" and the same in 4" steel and also found the factory 2" to get the dimensions off of it. It's a loaner. I'm going to dowel...
Type: Posts; User: Greg Bender; Keyword(s):
I appreciate the reply's . I haven't started but I picked up a blank of 2" and the same in 4" steel and also found the factory 2" to get the dimensions off of it. It's a loaner. I'm going to dowel...
It recently was temporarily discontinued by powermatic but I still need one or two of them. Anybody know of any, know somebody whom is not using or does not want it or them please message me. I'm...
David, find a metal supply house and see if they will do a few cuts on there bandsaw for a reasonable price. I try to deal with the same guys for my supplies and they have cut some rail and I-beams...
never use an end mill in a drill chuck. i have a smaller jet milling machine and the only drawback is that there is no knee adjustment. i have a BPT type that I have removed the table's and lead...
Yes I have since it's 10 miles from me and I worked there 18 years ago.
I picked up a blum hinge boring machine this past week but on the way home the breeze across the unit absolutely destroyed the dryrotted tubing . I don't have the owners manual yet so I was wondering...
Keith,
have any luck on the tee shirts?
Greg
Keith,
I need two extra large, short sleeve if the choice is necessary and would like two different colors if possible. Thanx in advance
...
Keith,
Where do I go to order new SMC tee shirts. Flat wore out the old ones.
Thanx, Greg B
Bill,
I had to respond to your response, my first job when I got out of the military was with an up and coming company called Summagraphics in Fairfield,CT back in 1976. Had to throw that out...
Pete,
Thanx for the info. There is 5 and maybe 6 of us coming in at different times so a house seemed like the best way to keep everybody happy. We need a car for one day for an event...
I wasn't sure if this was the place for this post but here goes. Heading to Vegas in october for SEMA. It's been a bucket list item for awhile and since my employer has a large presence at the show...
Mike,
Thanx, I was looking at it as a pdf file on my computer in work and could not definitively say that was what I was. I appreciate the verification .
...
I live in a fairly big area and work for a very large company. I know I can find bearings with no problem, as it is, we have two bearing manufacturers in town.What had and has me scratching my head...
Cary,
That was what I figured but I was hoping somebody on the site had done it and remembered what bearings were used.
...
Thanx guys, I do have one question. When I look at the powermatic 209 hh online since I don't have a manual, I see item #54 that is a bearing on the cutterhead. It only calls for one which I know is...
What kind of project is changing the straight knife cutterhead to a byrd head? I've already got the byrd head and I'm trying to prep for any and all problems that might pop up.I need to get bearings...
James,
That is exactly what I did originally but had an absolutely super deal on the HoldFast system for a killer price and could not pass it up. I took the o-rings off because the wall...
Thanx for the info, familiar with Ken's approach to oring lube having used it daily at work. Silicone was my first thought but wondered if there was something that would facilitate future easy...
Which adhesive is best for reinstalling O-rings back into my vacuum chuck heads? I had to knock down the sharp edges on the divider between the o-rings, it was leaving marks in the bottom of my bowls.
Mike,
I know I've seen the North State head in the list and I believe they are still on sale at Grizzly. Got one for my 20" planer for under $800 on sale with veterans discount.
...
You don't mention a budget but IR makes a TS-3 used, or a TS-4 new that puts out about 14 to 15 cfm and has a 60 gallon tank. They are generally under a $1k at Tractor Supply and online.Pretty good...
cody,
I think it has more to do with what tree's you have around you cause we have lots of burls here in NC. Quite the variety too.
Larry,
Mine has been doing it occasionally when I have the tail stock up tight with the live center. I thought, maybe I had the ram pushed against the piece too strong. I will have to check...
Does anybody know the name of the guy from Laguna who occasionally list's bulk carbide band saw blades on SMC. I need to contact him and his name escapes me at the moment.
...