If it was me, I would make each leg out of two pieces of 3/4 x 2 1/2" pieces of stock. Rout an appropriately sized groove centered in the bottom 5" of each piece anf then laminate them together.
...
Type: Posts; User: Derek Tuchscherer; Keyword(s):
If it was me, I would make each leg out of two pieces of 3/4 x 2 1/2" pieces of stock. Rout an appropriately sized groove centered in the bottom 5" of each piece anf then laminate them together.
...
Moose Jaw, Saskatchewan
Seven Persons, Alberta
Manyberries, Alberta
Love, Saskatchewan
Duff, Saskatchewan
Big Beaver, Saskatchewan
We also have Climax, Saskatchewan
In Canada you can get them from BusyBee Tools
http://busybeetools.ca/cgi-bin/picture10?NTITEM=B2959
Only problem...they don't ship to the US. If you will be in Canada they would be a good...
There is a plan almost identical to this along with the associated "online extra" in Shopnotes Issue 55
http://www.shopnotes.com/issues/055/extras/roll-around-store-all/
Derek
Yes with his press you can change speeds by changing the belts, but he wants it to be infinitly variable...and able to go slower than the manufacturers lowest setting achievable with the pulleys.
...
My wife runs a daycare and I boughtg a commercial wood unit similar to this for an amazingly cheap price and repainted it. However befor |I bought it I was working on how to build one and it really...
Hey guys,
Myself and a fellow woodworker where I work, were talking and he wondered aloud about variable speed drill presses. So the question...Does anyone know if you can use a seperate speed...
Please count me in!
Hey Brad I was in this same position at the beginning of winter, my garage is 18' x 24' and I had figured the material to blow in to R-30 would cost about $250, and was all set to do it myself until...
Thanks Marion, Please count me in.
Please include me in this draw! Thanks to Taunton!
I have had one since the beginning of September and I have found no real flaws to speak of. Take the crosscut capacity with a grain of salt though as to acheive the full capacity you have to remove...
I was thinking along the same lines as Dewey, even if you won't buy the saw for a while, pick out the one you will most likely buy then get the dimensions from that particular saw.
Woke up to -27F here this morning...they say with the effect of the wind it feels like -53F :eek:...yes I think my face froze like this! Was prepared though and truck started without a problem.
Thanks Angus!
Mmmmmm...Coffee.
Count me in please.
Walt, you have a way with words that I could never hope to match, and an outlook on this journey called life that is beyond compare. This is a hard time of year to lose a loved one, but the attitude...
Hey Bob,
Welcome to the Creek.
You may want to take a look here.
http://www.forrestblades.com/Dadocombinations.htm
The chart seems to indicate that their set is capable.
On the weekend I was routing a bunch of dados for a cabinet project. While doing this I was using my shop vac along with my Triton router. I was constantly cursing due to the vac hose or router...
Count me in please
Count me in please
UUUUUhhh .... Count me IN
after walking from the parking lot into work, -30 C (-22F) here this morning, -45C (-49F) with the wind-chill....Looked at my wireless weather station this morning, max temp this summer 38C (100F),...
Hey Gene,
Seems some Creekers are satisfied with it...
http://www.sawmillcreek.org/showthread.php?t=93008&highlight=rt1000
Derek
If I am reading it correct, you are trying to make a three tiered corner shelf. Essentially a quarter round converging staircase. I think you are measuring the radius from the wrong point, rather...
Triscuit for me...with a slice of jalopeno on top...MMMMMMMMmmmmm