Search:

I have the same router mounted in a table. Yes the switch has to be off and the plastic switch cover closed. Once I figured that out I had no additional issues.

Bill

I'd rent a large Ozinator.

What about Kiltz after?

Bill

Thanks for all the help. I'll go with the Brusso stop hinges and the Brusso slide hinge along with a few of the Rockler hinges that Lee recommend.

Bill

My box size is going to be 4 1/2" x 6 3/4" x 12 3/4" and the sides will 5/8". I'm going to make this out of Rift Sawn White Oak.

Bill

I have used the search function and have not come up with anything although I know this has been covered.

What jewelry box hinge do you box builders use? Do you use the Brusso stop hinges or...

I would bring the cabinets 1" down from the furdown/ceiling. Add a trim strip to the top and I agree give yourself some scribe room on the side of the tall cabinet and upper above the appliance for...

I have a laminate tip with a slight grained texture on it. The only reason I went with it is because we had some leftover panels at work so I didn't have to pay anything for it. The panels are...

I've had one for a few years and use it often. I think the quality is excellent. Like any tool if you drop it there is a possibility it will damage.

That said I'd highly recommend buying one.
...

Well it seams to me that parralel clamps are what I need to invest in. I've decided to get a few parralel clamps and a few universal clamps to try them out. I have around 40 pipe clamps so I'm...

What about parallel clamps?

They are super expensive and heavy.

Bill

I have been using 3/4" pipe clamps from Jorgenson. They do the job but the clamps do not clamp 90 degrees from the pipe to the clamp.

Is this normal with all brands of pipe clamps or are there...

I want to think IPE wood. Not 100% sure but wurth looking into.

Bill

Johnny,

Table looks great. Is the wood hard to work with?

Did you just clear coat for your finish?

Bill

I had a table with the Porter Cable 7518. The bearings failed twice in as many years. I ended up purchasing a Woodpeckers aluminum router plate and a Triton 3 1/4 hp router that can be used as a...

I think a lot of their one time tools are pretty cool. I've never purchased one because of the price.

Must be the anodized Red that makes them expensive. Hahaha. I will admit all their tools...

Bill,

I have the Ryobi laminate trim router and I just went to the shop and checked and it will NOT accept a guide bushing. The backside of the plate is angled where a normal bushing would fit. ...

I also finished my cutting board flattening sled.416731

Tell your son congratulations.

I worked on my table saw drop table. Integrated a router into it finally. Been wanting to do this for years.416727416728416729416730

I have the 1/2" Rapid Air run throughout my shop with multiple drops and have not had any issues with it. Although I don't have a major pieces of equipment that require a lot of volume of air such...

Thanks,

I didn't know they offered that set up. I was looking at the JLT #79F-6 with I think 3 rows.

If you get it please let us know how it works out for you.

Bill

Dennis,

What is the model number of the single tier JLT clamp system? I've been contiplating the same thing and looked at some JLT systems at some local cabinet shops that make doors. They all...

John,

Good point. I tend to over think things sometimes well maybe all the time.



Bill

I have been contiplating building a router Planer sled to flatten some end grain cutting boards before I run them through the drum sander. I've read some past posts on this and was wondering if...

Leo is correct. If you use the 71B3750 Blumotion 110 degree screw on hinge use "0mm" plate 173H7100 Wood Screw Plate. Your boring distance on the cup on the door is 5mm so the center of the hinge...

First you must decide on your door overlay and that will determine the hinge setback and plate height you need to use. If you have a face frames cabinet Blum offers hinge plates specific to face...