Kirk -
I've got a similar situation to what you've described and with the amount of wood that my wife is going through with the machines the DIY filter system isn't keeping up (since I don't...
Type: Posts; User: Ryan Matthews; Keyword(s):
Kirk -
I've got a similar situation to what you've described and with the amount of wood that my wife is going through with the machines the DIY filter system isn't keeping up (since I don't...
Bill - thanks for the reply - I'll try and do some googling on that tomorrow when I have some time.
Cheers.
Ryan
Dave,
On the bright side - the new PSU arrived and after I installed it I seem to be back in business. 99% power runs at 28Ma so it appears that we're back in business. However - the signal...
Bill - I double checked the wiring and also the voltage going into the PSU - L1 L2 reading was 221v steady coming from the Tripplite conditioner. When I bypass the conditioner and plugged the machine...
Bill and John - thanks for the suggestion. I'll reinspect the power lines coming into the PSU and measure voltage.
The wiring setup is 240v dedicated circuit - Tripplite line conditioner -...
Hey John - yes - I did buy the machine with 220v incoming line voltage - The PSU is direct off the line with 220v. maybe I should have gone with the 120v....you've seemed to have fewer issues than I...
Bill your memory is correct - this is the second PSU - I'll definitely trace the wires back to the controller and check for loose connections or pinching. thanks for the tip.
Dave -
I have some instructions via RayFine and their PSU supplier to check the voltage on the signal wire...I will be doing that tonight when I get home from work. The two things that they want...
Dave -
Thanks for the reply - when you say to check the high tension lines for 'leaks' - - would you be able to provide a bit more direction?
Are you suggesting that there could possibly be a...
Bert and Matt - Thank you for your replies - I agree I think its either the PSU or the Tube. What surprised me was just how fast it went from 'normal' operation to being pretty much dead....I thought...
Hi there - Its been a little while since I've commented on anything as I mostly lurk in the shadows and read and read and read....and I really still have so much to learn its tough to feel like I can...
Scott,
I'm happy I stumbled upon your post because I was probably about two weeks behind you in ordering the San Francisco port ebay 100W laser......reading through your ordeal definitely put us...