Roger - note in my opening sentence "trials of different brushes" for OB. Those are the Grammercy OB set. Huge improvement over everything else. $$$$ - but you get what you pay for.
I have a 1"...
Type: Posts; User: Kent A Bathurst; Keyword(s):
Roger - note in my opening sentence "trials of different brushes" for OB. Those are the Grammercy OB set. Huge improvement over everything else. $$$$ - but you get what you pay for.
I have a 1"...
Thx John
Your comments in some other thread led me to the oil-mod poly and the polycrylic so grateful there
I’ll give the foam brushes a test drive on those two, but they kinda freak me out....
Lou is a treat to talk to - especially about delta-style C-frame bandsaws.
Those prices are eye-popping. $100+ and $120+ on websites. A few crates fall off a truck somewere?
I got to be pretty good at brushing on OB finishes, but it did take a long learning curve, and trials of different brushes to get there. Our relocate/downsize to a condo canceled the VOC options,...
Not fer nuttin, but….
After that long, I’d consider checking the bolts/fasteners on all the drive components. There aren’t many - couple sheaves, belt tension, bearing fasteners to machine...
Well then, not all idiot close friends are my close friends. Good to know.
It really doesn't require much to keep them in good stead. Gently wash, quick rinse, dry immediately, stand on edge on...
Don’t know if this fits your situation or not. Made a batch HM end grain some time ago 2x2 pieces. 6 each 12x18 and 6x12. Off as gifts. With mason jar of mineral oil-beeswax goop
Only one ever...
Yep - take your design and volume projections to any of the large number of starcruiser-class alum extrusion operations.
The circle diameter to press that shape isn't any great shakes, but the...
Highest praise. Thanks Ron
Grand Brass Lamp Parts is where I got those parts - and the parts for the lamp itself. Great place, great people - always very helpful.
You're on it, Patty. That's the geometry of the DP - the locking function just off the back dead center of the post. The crank engages the pinion gearing at the rack which is centered on the side...
OK - sorry for the confusion. I intended to have this all 1 thread, extended by using Reply. I fell short, due to running out of time. Part 1 post is really Part 1 - table and fence design, and...
Consider the dimensions of the table - 36w x 24d, extending 2" past the post. To the left of the post is the table collar locking bolt, and to the right is the height adjustment crank. They are...
Tom - thanks for the kind words. I honestly never knew there was a legit use for chip brushes
Ken - stay tuned. You’re gonna love the punchline
Need bits and misc stuff to run this critter. And so.........
Under the left side ["left" is critical design element - more on this later] Is random pieces of "laying arount the shop" plywood...
Some years ago, I got the Voyager. Stuck a LLambrich keyless chuck on it. Definitely cool.
I felt this gear deserved a good table. Better than my first [newbie, lame] effort on the Delta. Better...
First of the month, eh? You're a guiding beacon to us all, Lee.
What are your plans post-JPW?
Yes to #1
Yes to #2
Nah to fancy finish. Wax it - first time, maybe twice if it is absorbed. I am hopeful that you routinely wax the primary saw table, so simply don't stop at the edge of the...
Dynamic pricing works very well on Atlanta expressways. Dedicated lanes. In general, charge changes wih congestion - the site says it is set using a "proprietary scientific algorithm", and gives a...
I was just being a wise guy about the 20 ton press, of course.
Send photos when assembled.
Too kind. Looks much worse in person. The El-um Crick [Kansas farmer pronunciation] Walnut classes it up. I made up the design kinda on-the-fly.
In the middle photo, you can see stretchers with...
There you go, Steve, usng science and logic to ruin a perfectly fine apocalyptic scenario. What's next - you gonna tell me I won't sail over the edge of the world?
This was mentioned a few times here. Got me thinking - always a risky proposition, I know, but still........
My walnut spacers are roughly 4-1/2" x 3-/4" in size, or just uner 17 square inches in...
File under: Be careful what you ask for. I view the bench as a tool. It has drill holes, blade scars, everything. No apologies, but no bragging either. Not in same class as all the other benches...
Yep. I gotta get there first. Later today