Search:

+1 on not using the washer.

Per the owner's manual: "For dado widths larger than about 3⁄8 inch, do not use the arbor washer."

Tim

Don't you love it when the manual and the tool don't match? Always adds to the fun of a new tool....

Page 11 of the manual claims:

T-SLOTS
The drill press table is fitted with two T-slots (HH) Fig. 20 for use with various drill press accessories (stop blocks, fences, or clamps). Use 5/16"...

Here is a link to the manual that shows setup and operation. Also has a parts breakdown. No dimensions, but should help answer your questions. The faces definitely are replaceable.
...

Please add me to the list. Thanks!!!

Maybe talk to them direct?

http://www.kieninger.com/english/index.htm

Tim

Looks like Highland Woodworking also has the same deal...

http://www.highlandwoodworking.com/sawstopcontractortablesawcns10.aspx

I don't have the Incra, but do have the Sawstop over-arm dust collection.

Here is a link to the install instructions. It shows how it connects to the various Sawstop fences. Hopefully this will...

Did you check the thermal overload? Try reseting it. It is the red button on the side of the electrical box. Push it in, it should click or snap as it resets if it was tripped.

Do you have...

I use a flat ground ripping blade from Infinity Tools (glue-lip rip, item # 010-024). Works great using a jig to hold the box at 45 degrees. Cuts clean and flat bottom kerfs.

I notice they also...

+1 for McMaster.

You need a "speed wrench" aka "speeder" like this:

http://www.sears.com/shc/s/p_10153_12605_00944271000P?prdNo=5&blockNo=5&blockType=G5

You can really crank it, hence the name.....

Tim

Call Klixon. Per their website "Almost every precision product we’ve ever made is still commercially available. Contact us for details."

http://www.sensata.com/klixon/klixon.htm...

Call the supplier and ask them? They probably cut your blocks down from bigger pieces.....