Search:

I used an original 20% off coupon recently at Home Depot when I bought a Dewalt DW3750 Pressure Washer. $999 and it saved me over $200 with accessories. They didn't hassle me one bit and I even...

Those are the little guys. I work in Information Technologies and 10 years ago, drives were much larger. I have some magnets at work that are very strong. It was always fun tucking one of those...

It's the centrifugal switch in the motor if I'm not mistaken. The click/clink is normal. My 5hp Sawstop does the same thing, along with most of the other equipment I have that has induction single...

My Millermatic Passport uses 12oz CO2 tanks to supply shielding gas for MIG welding. I'm surprised how much weld time I can get from a single 12oz fill. I bought a 20lb CO2 tank with a DIP tube, fill...

Thanks guys. Everyone is welcome to their opinion on the subject and quite honestly everyone would handle the situation in their own unique way. I believe I have been very flexible and...

Good luck to you Don. I'll be happy with the Sawstop over the long run, I'm sure. I'm happy with it now - it's not the saws fault it had a few bad parts. I just have to get over this bump in the...

Don,

That's true. I guess I'm so used to dealing with issues from online purchases and such that I in many ways have detached myself from personalized service. I informed Sawstop via my letter...

I received the replacement start and run capacitors today. I figured I'd swap the start capacitor first and see how things went. Replacing the capacitor without removing the motor was a real pain. ...

Sawstop is sending me a new start and run capacitor overnight since they don't want to take any chances. I should have it tomorrow and I'll advise. Again, they were a pleasure to work with and...

Very nice work Burt. Thanks for sharing as you always do.

For the price I don't think you can beat the Dewalt DW7670 dado set. It produces a very smooth bottom, little to no chipout and is easy to adjust. I've seen it as low as $80, but it's $109 at...

I received my Exaktor today. Overall it looks to be a very nice piece of equipment. Well I should say I received the remaining two missing boxes that Eagle Global Logistics hung onto for a few too...

I've used a heat gun to bend up to 3" PVC. To do 6", you would probably need two guys working both sides of the pipe. PVC retains it's heat pretty well and you can always reheat it to finish your...

The EZ is a nice system and works well. You can set it up easily and repeat, one after another. I enjoy using it and at times it's actually fun. It's also a challenge to come up with new ways of...

I don't need 20', but I do need 15'+. I figured with my circuit run being so short from the panel to the outlet that it wouldn't be a problem. The saw draws under 20A, but I figured it should at...

I decided today would be a nice day to wrap up getting my Sawstop 5hp saw installed. I picked up 20' of 10/3 SJ cord from Lowe's on the way home from work last night. I have a 30amp, 10/2 Circuit...

Use this code at checkout: PTA2OOFF

You might want to look at the Dewalt DW7350 Planer stand. Amazon has it for $99.99 with 20% off and free shipping. I just received two of them today.

Well it's Wednesday and I received my replacement rails and fence assemblies. The new ones are perfect. It took two business days after they replied to get here.

Anyhow, as some of you may have...

Are you sure they shipped it? My order sat with them for a couple of weeks before it shipped. Their CS was also slow to respond to emails. I got everything I ordered, but it wasn't speedy service....

Wow. Beautiful work Per. Talk about an upgrade. I wish I could have watched that being done because that would have been one heck of a learning experience. :)

On Saturday I started to assemble my recently purchased 5hp Sawstop cabinet saw with 52" extension and their fence. I ran into a snag though during assembly. My fence rails along with the fence...

Yeah - that's sort of what I'm considering for the Exaktor.

I ran into a snag today with the Sawstop. The fence rails are badly warped/bent/tweaked. I put the front rail on and was like.. what...

Thanks Rick. Once I find the best working position for the saw, it will usually be used in that position. Part of my plan with the EX26XS is to perhaps modify the stainless rails to allow the last...

Nice job Mike. Glad to see you got it all set up.