With regard to your other questions:
1.) It's best to match the pipe size to the intake size on the DC. In your case that would be 5". Although 5" is "best" you will have great trouble finding 5"...
Type: Posts; User: David Kuhnen; Keyword(s):
With regard to your other questions:
1.) It's best to match the pipe size to the intake size on the DC. In your case that would be 5". Although 5" is "best" you will have great trouble finding 5"...
His reference to "Shop-vac" was actually to say he will use a shop-vac "type" hose to extend an additional vacuum hose from the 4" S&D to a spot closer to the blade/cut area. He is not suggesting...
Dan,
I highly recommend you join BT3Central and ask Loring (LCHIEN) for his FAQ, it's more informative than the manual if you plan to hold onto the saw (he only sends it to members who PM him).
...
Ryobi Precision Cutting System is a BT-3000 series saw. Depending on age it could be a BT-3000, BT-3100 or BT-3100-1.
Check out BT3central dot com website for great info and support.
Ebay also...
Very nice small footprint set-up.
I can't quite tell, is the blower assembly and motor supported only by the separator ring supports? Are there any stability issues or excess vibration?
Actually, as David DeC said above, production shops use this technique a lot. Just stop into HD or Lowes and look at how the face frame is joined to an exposed side on their production cabinetry.
"cutting carcass top and bottom pieces narrower" yes, you have to plan for this when cutting the sides, top & bottom. Other than cutting a different dimension, I think it's easier to work with the...
Yes, I use this technique to build cabinets. I first saw this used by Marc Adams at a woodworking show seminar. He only puts a groove in the outside stiles and their main purpose is to lock the sides...