Click on the link on my previous post...
Yes, you need some special mounting track for $24.99 that the hold down $56.99 (each) is mounted on...
niki
Type: Posts; User: Nissim Avrahami; Keyword(s):
Click on the link on my previous post...
Yes, you need some special mounting track for $24.99 that the hold down $56.99 (each) is mounted on...
niki
You can make something yourself as I did...they press the wood down to the table and to the fence...
Not so much in use because of the Short fence and the feeder rollers that I usually use for...
Hi Glen
You are correct about using the fence as a stop instead of using a special "temporary back fence" as I do.
I could not think about it because of the construction of my table saw.
As...
Hi Lee
Do it like on this post....I made 2 "Full sleds" and 2 "Half sleds" with this method...I'm so confident that I just Super-glue the fence even without scres (on the half sleds) without doing...
Hi Neal
Well, woodworking, is something that you can accomplish in a few ways...
For every question or action, you'll get at list 2 answers or methods....just ask for the "correct blade height"...
Personally, I would not like to learn about TS safety from the Internet.
As you could see on the links above, there are many "Satans"...
I would recommend to buy a book like Jim Tolpin's "Table...
I made it like on the video link above and it worked like a charm...
I could even leave the riving knife and the blade guard in place...
The circle on the pics is of 24" dia (= 600mm)
...
This is my Aluminum straight edge - 98.5" long so it can "cover" also the 8' length...
It's an 1/2" thick and 4" wide Aluminum profile that is used by the concrete guys to straighten concrete...
Hi Dave
On one of my posts, I've said that after checking the "Static" alignment of the blade/slot, I'm fine tuning and checking the "Dynamic" alignment and I don't think that any measuring...
Hi Dave
Sorry if it's confusing a little bit so, let me try to explain it in different way....
Instead of the saw blade, let's install a router bit...the router bit doesn't have "length" and...
Hi Dave
Your initial check of the blade-to-miter slot alignment is very good...
First, small correction...The miter gauge should be at 90º to the miter slot (or the runner) and not to the...
Hi Johnnyy
It is correct to call it "Spreader" (according to OSHA) but normally, we call it "Splitter" and the new ones - "Riving Knife"...
The "Spreader" must be thinner than the saw blade...
I have a few sleds...2 of them are "Half sled", one is up to 16" wide boards...
http://i208.photobucket.com/albums/bb151/matsukawa/Picture%20frame%20WIP/22.jpg
And, another one for up to 25"...
I think that we have to make this post "Sticky" so every beginner, amateur and un-experienced guys will learn from it....and with the promised videos, it's going to be a "Hit"...
I would just...
Some 10~12 years ago, when I was still in Japan, I made something like those cauls but not bowed...
I got the idea from Robert Wearing's book "Making Woodwork Aids & Devices" (Carcass cramping...
Thank you Chris and Danny
Chris
As you can see, my drill press is a bench top DP.
I clamped an iron try square to the bench and, every time that I move the table out of "center" ( to change...
Hi Pat
As for changing the table height, I don't see any problem...
If I rotate the table, I can turn it back exactly to the same original position...
Please have a look at this post (it...
http://i158.photobucket.com/albums/t104/nanikami/DP%20Fence%20distance/16.jpg
http://i158.photobucket.com/albums/t104/nanikami/DP%20Fence%20distance/17.jpg
...
Good day
I would like to share with you my method of setting the Drill Press table fence.
Toooo the pics...
Regards
niki
Hi Nick
Maybe this post will give you some ideas...
http://www.sawmillcreek.org/showthread.php?t=78165
niki
About 11~12 years ago I made some mirror frames (the biggest was 32" x 48")- mitered corners and floating tenons - still no problems...
About one year ago, I made a frame for a glass table (26" x...
Thank you Rich and Cliff
Actually, I've never made a sliding table because I bought it with my TS as a "Package deal" and it can handle boards up to 39½" wide but most of the time I'm using a sled...
Hi Tim
Sorry to hear about your TS accident
Just imagine that in Europe, dado blades are prohibited so actually, all the dadoes are cut with a router...
Here is one video......
Ok Cody...I'm in... :)
For the long big boards, I use this one...the rollers are tilted forward so during the travel of the board, it is also pushed down to the table...
...
http://i158.photobucket.com/albums/t104/nanikami/Vac%20Hammer/0011.jpg
http://i158.photobucket.com/albums/t104/nanikami/Vac%20Hammer/0012.jpg
...