Kieth,
You may also want to take a a look at www.freedom9.com they have a very slick nas solution which is scaleable up to 1.6 TB one of the nicer features besides the very competitive pricing is...
Type: Posts; User: Chris Gregory; Keyword(s):
Kieth,
You may also want to take a a look at www.freedom9.com they have a very slick nas solution which is scaleable up to 1.6 TB one of the nicer features besides the very competitive pricing is...
Matt,
It seems many of us feel your pain, I am almost at the point where I might even be able to post some pictures of my soon to be shop (which eventually will be our home theater/rec/guest room....
Bob,
Have you tried Eagle Plywod and Doors? I'm away in Cozumel at the moment but I could get you the contact info when I get home on Thurs.
Chris
Hey Dennis,
That is terrible! Have you tried working your way up the support ladder through supervisors etc? That is a total crock they should forklift the unit and replace it! Unfortunately what...
Ben,
As always the information you get here is great! If you really want to isolate the sound you need to use vibration dampers which are just pieces of rubber normally with threaded rod sticking...
Hi Dave,
Which models were they? We have deployed quite a few of the small form factor HP's with zero (knock on wood) issues, our biggest problem is the limited number of aftermarket cards that...
My question for the gurus to answer is this: is there any reason I couldn't or shouldn't separate the disk drives from the rest of the computer? Also, do you know of separate power switch and port...
Wheelock makes a combination "audible strobe" you can adjust thr ring tones so they will carry over loud machinery and of course the strobe. Here's a link
but just for info but I am sure you can...
God Speed and Tom thank you for sharing, my condolences and thoughts go out to his family and his friends.
Tod,
Very impressive, it has to be a pleasure even just hanging out in your shop :)
Rule of thumb is that your panel meet 80% of your total load, and as Bill says you wouldn't want to cut yourself short and definitely go for the 220 volt capability, what I was referring to in my...
you are going to need to run three #4 (preferable) or three #6 (adequate) copper wire and you should use 1" or 11/4" conduit, depending how you run it you may also need to add a ground wire, you also...
It all depends on what you plan to do as in how many conductors and what gauge. A friebd turned me onto an extremely handy book that I think everybody should own, it is called Pocket Ref by Thomas J...
Mark that is sweet....!!
Doug,
Everybody has covered it quite well, it is very generous to let friends or family use your workspace and tools. This arrogant bugger seems to lack any appreciation and perhaps a broken clamp...
You beat me to it Jim ;)
Dan,
I'm not familiar with the model you are talking about but I believe the way they actually work is they are constantly open and will shut in the event of a hose failure ie uncontrolled flow.
And Matt has one for sale at a very nice price on the list:cool:
sounds like a slice of heaven:)
Thanks to all of you guys for your answers though I am surprised that a New Yorker would even dare to say anything about Jersey drivers :D, so what do I do change my name to Bubba and get a gun...
Peter,
I installed an Incra TS LS with the wonder fence and I have absolutely no regrets at all, it is definitely not the cheapest fence out there but I think it is the most versatile, I have some...
I would use 216 (I'm going off memory I think that is the right #)Soss hinges, they are a little tricky to install but when the leaves are closed you will have a nice tight joint and the mortises...
I am unashamedly a tool junkie and always try and by the finest tools, to me they are an investment and unless it is a ridiculously large investment that is the route I take for all tools, a perfect...
Besides the recession part of my downfall was subcontractring to big contractors, they dangle a nice carrot promising lots of high end projects, problem was you never got that last 5% of the job...
Rob,
Putting everything in the slab brings new meaning to "written in stone" you are locking yourself into your layout or at the very least making it an ordeal for any changes. I would run...