Search:

Thanks for the reassurance I am going to wash it down with dawn (some grease stains) use a chemical stripper wash again sand to bare metal wipe down with prepsol primer and paint I will post pictures...

I have a 1/8 thick 48" x 60" X 12" metal cabinet will using my ROS to sand it cause me wood finishing problems later. I posted a longer question in metal working but no one there.

I have a nice 1/8 thick metal cabinet from my father inlaw 48" X 60" X12" . I need recommendations on removing old paint and surface rust. Not to much pitting - - will navel jelly remove paint? I was...

Well it took almost a year but Jim had the best idea the miter tracks lined up so I built a stand with rollers and it makes a wonderful outfeed table. So I have another emerson question the blade...

So far no luck and there is webbing reinforcement and bolt holes for the trunnion under the cast iron table so router table is out. Seems a shame to scrap it out.

My brother took apart an old sears Emerson table saw ALL APART then lost interest and gave it to me - - it is going to the metal recycling next week unless someone can think of a use for it - - no...

I am real close to pulling the trigger on the 115v cabinet saw and rewiring it to 220/230v based on your conversation should I rewire my shop instead of the saw motor?

I got a 7.0 amp Bosch js470e at a tool show from the Bosch rep's. With the saw running they jammed a scrolling bit straight down through a 3/4 piece of pine then by using the cord to guide the saw...

glen the link seems to be dead for me - - is there some setting I need to include

Thank you brad - - I have been out of wood working myself. Bicycling and traveling around the U.S. since I retired so I am just getting restarted in wood working.

Mark was one of the most talented wood workers that ever posted here I loved reading his posts and building his jigs to make my wood working easier. I have a question about a slicer he constructed...

I bought one to get the tote for an old #7 AND to practise my tuning before I attempt the #7. The close up of the handles seemed to me to be worth the 20.00 Shipping was only 5.95 and I was able to...

WOW :eek: perfect timing The thread that led to this thread was the first one I read tonight I just won a Stanley 151 on ebay for 7.00 + 7.50 shipping and now I know how to tune it up and use it....

Do not strangle the tool to tight a grip will cause it to dig in and walk. Keep it moving a few extra seconds and you have a gouge. Be very careful to not tilt right or left - - -forward or back....

Jason this site had all the answers on how to wire a detached garage
http://www.sawmillcreek.org/showthread.php?t=17794

I was struggling with the wording on the NEC code sight while I was checking my barn wiring to make sure I had everything up to code. I found selfhelpforums.com. Click on detached garage it step by...

The old hammer and wood trick was that a 5 or 10 Lbs hammer? :D

Thanks for all the thoughts. It would work fine but for my own piece of mind I am going to run a seperate circuit with 15Amp breakers.

Bought the DC2000 web special 239 +55 shipping 294.00 total the 65 DB sold me anything that quiet has to be balanced and besides its running all the time so i wanted it quiet. I hope I made the right...

Bought the DC2000 web special 239 +55 shipping 294.00 total the 65 DB sold me anything that quiet has to be balanced and besides its running all the time so i wanted it quiet. I hope I made the right...

I installed all new Pella windows in my house 5 years ago using 3 coats of water based minwax polycrilic. I love it the Bay window looks as fresh and clear as the day it was first installed. I used...

I really like that popup router table. I have been looking for neat Ideas before I cut the hole in my side table.
welcome
Chuck

I was responding to the post. from Greg Heppeard which said "The difference is really just a 5 year warranty...most of the rest is about the same as the limited edition."
So I did my additional...

I Paid 1749.00 for my X5. Inside was a 100.00 off my next purchase. I bought a DC. which I was going to buy anyway. so I got the better switch and 3 years extended warranty AND a coupon book for an...