Search:

Hello,

It has been quite a while and I have not used my laser much. I did not return and update this as I should have and meant to keep it up as a matter of public service. I eventually discovered...

Here is a copy of another conversation I am having to keep this thread up to date.

3 Blinks normally indicate a RF fault. You can try to reset the fault by removing the 2 power cables from the RF...

Hello,

Synrad said that if the problem wasn't so random then it would almost for sure be an issue with the T-60 tube or exciter system as long as the power supplies have been confirmed to be...

Scott,

After flashing firmware with Trotec this morning the problem still continued. They suggested that the Mainboard or IO board could be my problem. Unfortunately these are rather pricey and I...

Hello and Happy New Year. I have given the suggestions made previously in this thread a try including doing a shop re-arrange so I could use a shorter USB Cable. My Laser is still randomly working...

Thanks Mike, It's nice of you to share a little more. I'm just hoping to get a little smarter before I get back home and start putting time and money into solving this. It is quite often embarrassing...

Mike, thank you, was your laser moving the optics around going back and forth pretending to engrave "going through the motions" and not firing the laser? It really surprises me that the USB cable...

Yes, of course. They are very helpful and already helped me upgrade to JobControl X when I bought the machine. Flashing firmware is still a risk with or without their help and I don't want to brick...

Scott Anders, Thanks for the new suggestions. I will work through those when I get back along with re-checking my firmware as Scott Morris suggests. I have already been planning to re-flash my...

Hello Scott, thanks for the reply. I will give the suggestions you made about the material database settings a try when I get home. I have a USB between the Computer and the Laser. The serial cable...

Hello,

I have heard there is a savvy group of Trotec users on this site. I have a 2006 Trotec Speedy 300 60W (Synrad) with Jobcontrol X. I bought it used within the last few months and have been...