The only suggestions I can make are to crank the planer to its highest point and get a look at the rollers. If you still cant see in there either use a mirror to get a look or take the service panels...
Type: Posts; User: Dave Sims; Keyword(s):
The only suggestions I can make are to crank the planer to its highest point and get a look at the rollers. If you still cant see in there either use a mirror to get a look or take the service panels...
Tell me what you guys think. I found this on a contractortalk.com:
Basement Column Wrap Recipe:
1) Use 1x6 material to build a three-sided, "u-shaped" box to slide around column. Keep the...
No shaper here. sadface.
Any thoughts on miter lock bits and their use for this application?
Ez-level looks very helpful. My only concern is that the video says it can only lift a cab 1/8" off the ground.
You've got that down to a science...sounds like I can't go wrong with that tried and trusted method. thanks =)
I am interested in chamfering the corners of the cabs. What do you think?
Good call Kevin. Will do.
I will get some more info on the flooring this weekend.
I think I have most of my issues addressed. I still need a solid game plan for anchoring trim around the 4...
Thanks for all the input.
I will ask them to insist on wooden studs on the walls where cabs are going to be installed. I was thinking of anchoring two pressure treated 2x4s flat on the concrete...
A circular saw with guide or a track saw would serve to break a full 4' x 8' sheet down to manageable pieces to then send through a table saw. I sometimes will use a circular saw with guide for this...
I would recommend purchasing the best tablesaw you can afford. A splitter is a must and a riving knife is a good idea. I use my table saw on every project. I think it would be your go to tool as well...
Mel, can we see a pic of your handy work?
Jim, good call. That will come in real handy installing in-stock cabs.
Dave
What is the most acceptable way to camouflage the joint between a painted face frame and applied end panel?
I have tried gluing the FF and applied panel and sanding flush, but the seam comes back...
I think they mentioned carpeting the floor. I like the idea of getting the cabinetry off the floor with legs of some sort. Either way, think I should prime/seal the bottoms? The media unit will have...
The project is finishing off a basement with a media built-in, adding a bar area and wrapping 4 metal posts with decorative wood columns/trim work. I will be doing the work for a relative and they...
I decided to go with Grizzly machines last month. I am still setting everything up and running 220 to the garage. I drove to the PA facility and purchased:
G691 with the long rails, both mobile...
;).
I thought I came up with such a slick idea of gluing in spindles and spacers into a slot because I couldn't figure out another way to get a clean mortise and tennon in an arch. After all day...
I do get some nice wide boards from a local farmer, but they are usually twisted or cupped to the point that I have to rip them into narrow boards to get a descent thickness.
I really like ease of...
Almost 5,000 cfm? Is that thing for real?
I could save shipping with Onieda. I would have to pay sales tax though, so it would pretty much be a wash.
What really mixed me up was that the Onieda...
A longer bed is important. I looked into the hammer and I just dont think it is for me. thanks for the recommendation though, it looks like a quality machine and the sale price does put it within my...
thank you all for the helpful info. Dust collection is a bit of a cult. I dont think i will lose any sleep with an air cleaner and a descent dust collector.
I agree that the grizzly seem to offer incredible value. I am about 4 hrs from the PA facility. G453px for the planer and g490x for the jointer.
I am trying out some beginner mortise and tennon joints. I am making a cherry headboard and footboard with some square spindles 3/4" x 3/4" that fit into a slot with spacers to give the look like I...
I hear you loud and clear glenn.
I will have to vent inside for now. He are hoping to buy my wife's grandparents house in a year or so. They are slowing down and the house is too much for them. I...
That is exactly what I wanted to hear. thank you