Search:

I picked up my Delta 18-900L from Home Depot today and I am VERY pleased with the purchase

First impression - fit and finish is excellent. I checked the runout on the the spindle with my Betterly...

I also have a TS55.

What do you mainly plan on using it for? If it is sheet goods and 3/4" lumber I would go with the TS55 instead of the TS75

Regarding the dust extractor - they basically...

I don't know where you are from, but in California someone trying to make a citizen's arrest can use 'reasonable force' to keep a person in custody until the Police arrive. Citizen Arrests are...

Thanks for the tip :)

Fine WoodWorking rated the Delta Delta 18-900L drill press the "Best Overall" in their Oct 2015 issue. I was considering buying the Powermatic (which wasn't in the review)...

This is what I use on my MiniMax

It will slip into a 5" hose and go over the 120 mm port


321014

Don't overlook the Bosch Vacuums

I have a Festool CT36 which I purchased with my dts 400 sander. Since then I bought the Mirka Ceros (great sander) and a Bosch Vac which I primarily use with my...

Betterly Una-Gauge

Over the years I have collected a bunch of "precision' measuring devices to use with my woodworking tools. Align-it for my table saw, different height gauges for my router...

I had a Fuji 3 stage HVLP and it really struggled trying to spray latex, even when diluted. Also, it felt like I had a garden hose attached to it, even though I was using the smaller 'whip'

Graco...

Yep - I bought the older corded version when it was first released. It did a good job on some cabinet doors I was painting - but a LOT of paint was wasted and there was not much control.

Again,...

I know this thread is several months old - but I have been thinking about getting a new drill press and just finished reading the Sept/Oct issue of Fine WoodWorking

They tested 10 drill presses...

Don't let the paste wax dry. Use an applicator to apply it and then immediatley buff it off

I don't know how 'portable' your hose has to be, but I have replaced most of my shrubbery sprinklers with a pressure compensating dripline.

Basically it is 17mm (1/2") tubing with emitters spaced...

see if this helps
http://www.instructables.com/id/How-To-Bypass-Windows-30-day-Activation-Product-/

So what do you think my chances are of me being able to find this "extra knive" when it comes time to buy the 2nd set at a later time :)

The only problem with TersaKnives.com - is they only sell in multiples of 2 where SimanTech sells by 1.

So if you only need 3 knives...

SimanTech Inc

http://www.simantechinc.com/index.php?l=product_list&c=2

reddit.com/r/PleX/

forums.plex.tv/

General Finishes Black Poly in Gloss. If not glossy enough add clear top coat...

Did you see this post?
http://www.sawmillcreek.org/showthread.php?229842-New-Powermatic-8-quot-Jointer-1-100*

For info - the difference between a 5.5' CU300 and a 8.5' CU300 was $700 about a year and a half ago

Larger tires should lower the revolutions per minute - so I don't see how your axle bearings would be effected

I would be more concerned about the 'tongue weight'. As a general rule, you want...

On my 5.5' CU300 there are 5 main bolts that attach the slider to the frame. Two on each end about the width of the slider and one in the middle on the outboard edge. (Because of the weight, the...

After you try to properly align and level a 8.5' slider - you may regret this decision.

You need to really think it through, it is no trivial matter. Do you have the proper tools, straight...

It looks like you have your location as San Antonio, TX

In my experience, MiniMax uses Estes and Estes has a terminal in San Antonio - Unless I am missing something - all you should have to do is...

For $143 - looks like a pretty good deal. Complies with EPA regs, description say HEPA Certified...