soak them thru wear until dry . thats how the USMC had us brake in new combat boots 50 yrs ago.
Type: Posts; User: Frank Ashmore; Keyword(s):
soak them thru wear until dry . thats how the USMC had us brake in new combat boots 50 yrs ago.
2 screws in each end of the shelf ,2 saw horses set apart so only the screws are on the sawhorses,spray 1 side and edge then flip using the screws and spray the other side and edge,using the screws...
get a real t/s
Have a Graco finish pro HVLP system works just fine ,been using it for about 9yrs now .Finished this with it 369033369034spar varinsh
The finish is 6 coats of ManOwar spar varnish
367429367430Live edge walnut table I just finished, ordered the stainless steel legs from a shop near Chicago
called Econ Welding .How do you all think this do living outdoors on a covered deck...
Put wheels on your saw horse's?
or a c3 77 1977 . oh you said it was a late model
in Fenton Mo.? Just found this place ,they have been there for5 yrs. Making my first visit today.
Lowes carries double sided duct tape
Im lucky to a shop big enough for a table saw with a sliding table that can crosscut 60" miters and to break down sheet goods I use a stock feeder ,goes real fast with good in feed and out feed...
Finish will be clear satin lac.
A mahogany table for a customer just set up with dry m/t joints, piece of ply on the bottom will be replaced with a nice looking maple shelf.
The customer supplied the wood for this job ,the pic of...
It was made for a customer .Sealed with white vinyl lac sealer and then sprayed with an off white latex paint. The doors on the base are hinged normally .It cost the customer about $400 a linear ft.
315452315453315451Finally got this bookcase installed .16 ft. long moved it there in 8 big sections .Took 5 hrs. to assemble and crown it
mine goes to a horse boarding farm too
I have some like that they wind very easily.
putting finish on a 16 ft bookcase
Its a Sunhill sander .Probably the same manufacturer just different stickers .
Its a Ryobi .Have had that one for 24 yrs. Hitachi made one very similar.
pic1 is the 15-30 sander , band saw dust collector .#2 is the table saw sharpening table in the corner stock feeder and a 4x132" edge sander .
#3 is looking back the other way towards assm. area...
Look for a shop that sells used stereo equipment .We have one here that reconditions old amps turntables and stuff
backing down sheet goods is about it
Thanks for the nice comments .Yes it will delivered in 6 pieces .I have been a woodworker for almost 40 yrs. now. The shop is almost 1000sq.ft. in my basement with a walkout and a sidewalk that runs...
312398Hello this is my first post here . This is a 16 ' long bookcase Im building for a client .
it will be painted white with an oak counter top on the base cabs stained to match the floor. There...