Thanks all, yeah I scrapped the lot, it was about 160 bdft, air dried, usually never had a problem until this batch..
I'll be more diligent if I use the air dried wood again, or go back to full...
Type: Posts; User: Justin Jump; Keyword(s):
Thanks all, yeah I scrapped the lot, it was about 160 bdft, air dried, usually never had a problem until this batch..
I'll be more diligent if I use the air dried wood again, or go back to full...
Anyone run into these buggers? I had some cabinetry built where some of the wood showed signs, but obviously still has activity.
Of a bunch of drawers, this is the only location that shows any...
Ive decided last night that I am going to shiplap them. However, what about the ends, is that a butt joint or do I plan a shiplap into that end also? I know that wood moves more across the grain than...
359805359806359807
Hello all,
Questions on a pine patio roof I plan on starting here in the next couple of weeks.
I picked up @ 700 board foot of rough cut pine, and my plan was to machine it all down into 6”...
While not ideal, I am going to attempt to make my first interior door, using poplar, 6/4, on my router table.
I do have good dust collection, Incra lift, and a Porter Cable 7518 3 1/4hp router,...
Im good on the milling part, I got an 8" jointer and a 15" planer....im torn on the shaper/router deabte...maybe if one shows up on CL....
It’s been a while since I posted, some small projects here and there, but knee surgery was the better part of my year last year!
Anyways, getting into door making next, I got an opportunity to...
331091331092331093331094331095331096331097
331082331083331084331085331086331087331088331089
Hello all…..
It’s been a while, but I have been wanting to get around to posting these since Christmas, and just got around to it.
I started last June, and took right until Thanksgiving to...
Ill chime in here, though there are many on here with much more experience painting, but I got most of my info from here, so I do not mind sharing.
Also – take into account another paint called...
My soffit is flush with the cabinet, all the way around...I am using 1.5" rails with 1/2" overlay.
The can light is with a set of 3, if I moved that one, it would be closer to the center light...
OK all, one of the last things to finish up the kitchen is to figure out my crown molding, and I need some input.
A few rookie mistakes put me into a bit of a dilemma.
The original plan was...
Mike - nice post.....I cant believe I haven't come across that post before....looks like you may have lived/cooked through that, just what I did this summer, I got lucky though and was able to use...
I'm using soft maple - at least that's what I ordered. I have a few boards that are heavier than the others, might be getting some hard maple in there. I get it in either 8' or 10' lengths.
I...
OK all, I have been through no less than 6 boards that are fairly flat from the supplier, only to go through the machining process to get them to 2” wide x 55” tall stiles, to have them bow.
Of...
This one is quick and easy......
My cabinet doors are painted white - do you normally drill the 35mm (using 1-3/8") hole before or after you paint?
I see pros and cones for each way, but not...
I used these, and each one of my kids have their own side for their toothpaste and toothbrush.
...
Jeff,
Look into one more option, its called INSLX Cabinet Coat.
This is a bit on the thick side also like ProClassic, but both products can be thinned to properly spray with HVLP, following the...
Forgot to mention......
I did watch the Woodsmith video, and followed that pretty much to a t with setting up mine, but still for some goofy reason my fit was very loose on a 5/8" thick drawer.
...
Porter Cable 4212 dovetail jig……
I know there are a million threads on this out there, and I think I read most of them…..
I am having two issues making my dovetails for my drawers for my...
Two coats of Shellac based BIN Primer, sanded to 320 between coats, the two coats of INSLX Cabinet Coat.
All sprayed with HVLP, the cabinet coat was thinned per Jeff Jewitts procedure in his spray...
Jim - do you spray the drawers after assembly? Was wondering how you handle the blow back if so.....
Well, didn’t make it before the kids started school, so I will have to use the kitchen while school is in, no big deal…..countertops are in, sink is in, refrigerator, and cooktop and oven this...