Search:

Why not contact Terminus directly?

Looks like Inuit.

Thanks for all the input! I'm looking into having the batteries rebuilt.

I currently have a set of Dewalt 18V (nicad) tools; drill, impact driver, circular saw and right angle drill. I've got 3 batteries, however only one holds a charge anymore and I find myself draining...

Rod, do you have more info on the mill you built?

Stephen, I've been trying to find the same bit for the last month. I've called Hilti USA, they no longer make that bit and have none in stock.

There are a couple manufactures that make a 6.25"...

I would think that would work fine.

Jim, I have done exactly this. I added the 1/4 Delta PF to the 'standard' Benchdog top. First attempt was to put in in the left rear corner. Bad idea, not enough reach on the arm. It worked much...

Ryan, where did you order for less than $350 including shipping?!?!?

Bob

John, I luv the motorized lift. I have a m12v in a benchdog table that I am thinking of converting. You mention that you change bits below the table. How to you accomplish that? I end up...

Matt, how is this top attached to the base?

Can I ask what software you are using on your designs???

Bob

Jay, I am considering buying a pneumatic Foreman but have the compressor concerns that you mention. What size compressor were you using?

Bob

Jim, I updated the shop layout to better detail where the lumber storage and work areas are. Hopefully it makes things a little clearer.

41435

Jim and Roy, lumber storage will be along the wall with the black X which represent the chop saw. That is also why I placed the jointer and planer in that area as well.

The area nearer the...

Rob, the unmarked room will be an office. The finishing area will be the upper right corner with moveable walls or curtains. There is a explosion proof fan in the corner to evac any unwanted...

I am working on the tool layout in preparation for dust collection layout. I thought I would get some additional feedback from the group...

41421

Bob

I have purchased from McMaster-Carr. http://www.mcmaster.com

Try product # 5136k27

Bob