My 22-560 just recently started making a noise similar to what you've described. Guess I'll be checking it out to see if mine has the same issue.
Type: Posts; User: Greg Scott; Keyword(s):
My 22-560 just recently started making a noise similar to what you've described. Guess I'll be checking it out to see if mine has the same issue.
It's been six months since my bout with TE started. I'm just now getting to the point where when I grip something very firmly the pain is not a problem. Mine was caused by drilling about 450 holes...
Jeremy,
Don't sell yourself short by thinking that you would be eliminating possible projects by combining these into one project. There will be far more projects than you will have time for in the...
My Long Ranger stopped working yesterday. The remote lights up but the receiver will not trigger. I tried to reset the receiver by pushing the program button, it beeped. But when I push the button...
I've done 2. The first was a Rockler 3 in 1 made from oak.
The second is my design stole ideas from different pictures it also converts to a day bed and full bed it was made with maple.
...
I surprises me that Lowes and HD actually sell any lumber at all for that kind of price. I just purchased 50bf of red oak 10ft long boards 10" wide SEL not a knot or defect to be found for $2.25bf.
Keith,
It's probably 4.5" high and 8" in diameter at the rim.
I forgot to mention that the finish is just buffed and waxed.
Greg
Well actually it's my second bowl but the first one from a solid piece turned out to be more of a funnel (id hole in bottom). Anyway it's mostly maple with a few pieces of cherry thrown in there.
...
I get skeered just looking at that thing. Did you cut the feet with a jigsaw after the initial hollowing out of the bottom?
Bob,
Never noticed that down there before, I'll send him a pm to see if he still has it.
Thanks for the heads up.
Greg
I have an older Rockwell/Delta lathe and I am looking for a different tool rest base. I have to adjust my current base with a 3/4" wrench. I'm looking for one that can be adjusted with a handle on...
Since Tyler insisted on some pics here are some of my conversion.
Greg
The first pic is the overall dc. I've mounted the blower to the wall so the incoming pipe could be stationary but yet the...
I'm fairly new to turning so I'll let the experts judge if this qualifies as a gloat. Picked up these GreenLee tools at an auction for $30.00. Can't find any info on them it appears that GreenLee...
Can any of you scrollers tell me what this saw is worth. It is a Hegner MultiMax-2 Precision Scroll Saw on steel stand. Machine No. 16012, built in 1984.
TIA
Greg
Michael,
When I say my filter get's clogged up I mean from very fine dust from my drum sander. It doesn't seem to be a huge problem when using planer or jointer due to the size of the material...
Michael,
I've attached a Wynn filter to my DC-1200. First of all you don't need to make a doughnut if you get the larger diameter filter. Just put some weather striping under it before it gets...
Here are more shots of my ts station.
Here's mine. I picked up a bunch of almond colored sheets of particle board and came up with this. I based it upon the one that was in Wood magazine a couple of years ago. The casters are double...
Jeff,
I've tried the straight and sheer. I didn't see a lot of difference between the two on hardwoods. But if you want a much better cut that will all but eliminate tearout use the spiral flush...
Zahid,
Up until about a month ago I had used that same drill press for all of my dp needs. While I admit it has limited capacities it has performed without fail. If I only had $40.00 to spend I...
Larry,
You might want to consider getting a low cost hvlp gun just to see if you like it better than your HF. I picked up a HVLP from Menards for about $30.00. It has performed great IMHO. ...
Maybe butternut. Grain is very similar to walnut but quite a bit lighter.
Craig,
Here's mine, it is loosley based on one that was in wood magazine. Sorry about the link but I've previosly uploaded this file and don't know how to post it in the thread so the picture will...
Kelly,
Nice looking cabinet. I did something similar for my saw. For a word of advice, go to Hartville tool and grab 4 of these for your casters. They lock the swivel as well as the wheel and...
The Grizzly G7946 radial drill press is only $252.20 delivered. This gives you much more working capacity than any standard floor model drill press and you only sacrifice the number a speeds and 1/4...