Search:

I've done business with Mike before, with great results. I'm just having a hard time getting hold of him this time. Is there anyone else out there selling Bowl roughouts?

Is there anybody out there selling kiln dried bowl roughouts?

366620366621 This is what I've ended up with and it works great. The battery pack and switch are held on with velcro for easy removal. I used the helmet for 4 hours several days ago after giving it...

Well my Ravpower 10400 arrived the other day. It does the same thing as the others I've tried. As soon as power is applied to the fan the circuit kicks open and shuts it down. The only thing can...

I received my Ravpower 20000 mAh pack today and it is a no go. When ever I hook it up the fan starts to nun but kicks off instantly. Ordering the one listed above tomorrow. Hoping it will work. ...

I know this thread is a few years old so please forgive me for reviving it. My Airstream battery just quit on me and I am interested in what I have been reading above. Can any of you give me any...

I am having a problem with wasps eating my teak patio furniture. Is there anything out there that would keep them off the teak and not be objectionable to to be around? My wife is allergic to bee...

Have any of you ever built anything from a whiskey barrel, other than planters? A client wants me to split a barrel length wise and turn it into a cabinet/display case. I've never worked with a...

They need to finish out at 18-20 inches diameter and about 5 inches deep.

Thanks a bunch for the info guys. I like the idea of cooking the wood before final planning and fitting. Now if I can talk my wife into letting me use her stove. Oh, by the way, 180 degrees for...

Do any of y'all know of a good, dependable source for dried, roughed out salad bowls? From time to time I get requests for bowls larger than I typically run or for quantities over and above current...

Damage to the box is not a problem. Cigars stick to the sap and tear when moved. That's the big problem.

Thanks for the replies but I have one question. If I seal the wood with something won't that stop the moisture absorbing qualities of the cedar?

I've seen several posts about cleaning the sap spots off with denatured alcohol but nothing about preventing the spotting in the first place. Is there a way to do this? Are there suppliers out...

I used General Finishes wipe on poly. 2 coats of sealacell followed by 8 coats of top coat. I rub out each coat with mineral oil on an abralon pad starting with 1000 grit in between the 1st coats...

Funny thing John, I don't smoke. But I love to make boxes and turn bowls.

I finally got these two boxes done and photographed. With good info from the "Creek" each one is a little better than the last. These are numbers 4 and 5. Using the Incra I-box jig and Freud box...

Thank you so much for your help and information. I knew I could count on the creek. I'll post some pics when I have the urn done.

Mr. Keeton, Thank you for your information. Your estimation of about a cup of volume was right on the mark. My only other question is about how large to make the opening?
Again, thank you for...

Do any of you turn burial urns? I have been asked to turn one for an infant but do not know how big to make it. Any help you can give would be greatly appreciated.

I just got my new Incra I-box, box joint jig and Freud box joint blade set. Got them installed, setup and tested. Wow, what a game changer. At least for me anyway. I've struggled for years with...

Well after several deep breathes I got it done using the table saw. I used a pull saw to finish cutting the top off and a box cutter to trim the edges. A quick run through the router and a light...

I have a pile of rough sawn, kiln dried hickory that is cupped. I am thinking I should join one face and one edge before planing and ripping. I don't have a lot of experience with rough sawn timber...

Have any of you done much end to end splicing of boards for a table top? What is the best way to go about it? I have some hickory I want to use for a table top but the boards are not long enough...

I am not sure if this is the right place to post this but here goes. I just found out that Home Depot in the Memphis TN area is clearing out their DW734 planners. The price just dropped from $399...