green model 106

[william carey]

Hi Guys

I envy you guys with your laser engravers and I hope to own one someday but it's hard to justify the cost being strickly a hobbiest. I do however have a green model 106 rotary machine that I can't find bits for anyone know where I can get parts?

[Larry Bratton]

I did a search and found a complete machine on Craigs List for $200. You might grab it for parts.
Here is the link http://philadelphia.craigslist.org/tls/976785695.html
Looks like it was posted on 1-01-09.
(possible you are the poster on CL since you don't show your city, this one is in Lititz Pa.)

[Tony Lenkic]

William are you refering to engraving cutters as bits. Those you can get from any engraving supplies houses. Try Johnson Plastics closest to you or Quality 1 Engravers if you are in Cal. Check out Bits and Bits in OR. All should be able to supply you with either 1/8", 11/64" or 1/4" bits.

[william carey]

Thanks larry and tony I really appriciate the help and yes tony i am referring to the cutters
thanks again
Bill