Originally Posted by
james mcgrew
vectric has released aspire 2 with nesting, fluting and a bunch of other great and neede features
jim
Hey Jim,
just checked it out and that flute section is what I have been after for the last few years. many other neat features that are very usable. I may have to look into it further if ArtcamPro doesn't step up to the plate with what I need.
Does it have the ability to user define your own tools? Like a thumbnail round over bit. It has multiple radiuses in it. So I would need to be able to use a cross section to design the tool.
Can it do it????? Can it? Can it? Please tell me yes!!!!
OK enough groveling. Worth taking a second look for me.
Keep us posted.
Thanks and ...
Have a Blessed day,
Michael Kowalczyk
Laser-Trotec Speedy II 60 watt with 9.4.2 job control and will soon upgrade to JC X
Corel Draw Suite X6, FlexiSign Pro 8.62, AI CS3 and Lasertype6
CNC Routers-Thermwood model C40 with 4th axis. Thermwood Model 42 with dual tables and dual spindles with ATC for high production runs,
ArtcamPro 2010_SP4, EnroutePro 5.1, BobCad v21 & v24, Aspire v8 and Rhino 5.
FOTC link
http://www.sawmillcreek.org/friends.php?cp=210&lp=0&t=0&q=