Router users...........you spindle guys already know about these.
Spindle Type Collets for Porter Cable Routers
.
[OP]
Member
Router users...........you spindle guys already know about these.
Spindle Type Collets for Porter Cable Routers
.
Last edited by Angus Hines; 01-17-2009 at 10:36 PM.
Member
Angus i bought the set for around $70Originally Posted by Angus Hines
Router users...........you spindle guys already know about these.
Spindle Type Collets for Porter Cable Routers
.
well made and well worth the money.
[SIGPIC][/SIGPIC]Camaster Cobra 408 working table size 48 x 98
Wincnc,AspireII,PhotoVcarve,Cut3D
HX6090SE 60Wworking table 23”X36”
LaserCut 5.3
Coreldraw X3, photograV 3.0, Photozoom3
Sawmill Creek is financed in part through member contributions.
Many members just like you have found extraordinary value in becoming a financial supporter of SMC.
Friend of the Creek
james are they quieter as described
jim
Member
Quieter is relative.
Anyway how the heck would I be able to tell? I have a PC as a spindle lol.
There sure is less slop in them, at least less than the standard pc ones.
Last edited by Rob Russell; 01-26-2009 at 1:02 PM.
[SIGPIC][/SIGPIC]Camaster Cobra 408 working table size 48 x 98
Wincnc,AspireII,PhotoVcarve,Cut3D
HX6090SE 60Wworking table 23”X36”
LaserCut 5.3
Coreldraw X3, photograV 3.0, Photozoom3
Sawmill Creek is financed in part through member contributions.
Many members just like you have found extraordinary value in becoming a financial supporter of SMC.
[OP]
Member
I just got mine in Friday and played with them over the weekend. And I won't say quieter. But, I will say it is a more harmonious frequency when cutting 3/4 cabinet grade A-C ply wood. It dosnt seem to scream but rather hum. If that make any since.
Short version: NOT quieter just nicer to listen to.
Member
Angus do you have a spindle or router?I just got mine in Friday and played with them over the weekend. And I won't say quieter. But, I will say it is a more harmonious frequency when cutting 3/4 cabinet grade A-C ply wood. It dosnt seem to scream but rather hum. If that make any since.
Short version: NOT quieter just nicer to listen to.
[SIGPIC][/SIGPIC]Camaster Cobra 408 working table size 48 x 98
Wincnc,AspireII,PhotoVcarve,Cut3D
HX6090SE 60Wworking table 23”X36”
LaserCut 5.3
Coreldraw X3, photograV 3.0, Photozoom3
Sawmill Creek is financed in part through member contributions.
Many members just like you have found extraordinary value in becoming a financial supporter of SMC.
[OP]
Member
Posting Permissions
Reply With Quote