I would like to solicit some design input for my built in entertainment center. Sorry for the 2D drawing, I haven’t taken the time to learn sketch up yet. There are two areas that I’m struggling with.
All of the doors are inset doors. How large should I make the rails and stiles, and should they be consistent across the entire piece? Right now the R&S are 3” for the doors on the four outside bottom cabinets and the two glass doors on top. They are 2.75” for the doors under the TV and 1.5” for the three drawers under the TV. I am especially struggling with the drawers. I can’t seem to find a good balance.
I’m struggling on how to divide the box directly above the TV opening. Right now the plan is to provide the illusion of dividers by using a frame and panel back. Any thoughts on the number of panels? The drawing shows 3. Will this look odd because none of the other backs are frame and panel?
All other input on the design is appreciated as well. Thanks
Eric