This piece of spalted maple stands 7" X 5.5" and is finished with 5 coats of gloss wipe on poly. I tried a bit prouder lip/mouth than usual and a broader shoulder, just playing around with form. As always critiques comments are welcome...Bill...
This piece of spalted maple stands 7" X 5.5" and is finished with 5 coats of gloss wipe on poly. I tried a bit prouder lip/mouth than usual and a broader shoulder, just playing around with form. As always critiques comments are welcome...Bill...
Looks pretty good to me Bill! Petty wood - great finish! On the lip - just my opinion, but I would have rounded the lip and tried to mimic the base form instead of using an angle cut. Just me....... I do like the form a lot! Keep up the good work!
Steve
“You never know what you got til it's gone!”
Please don’t let that happen!
Become a financial Contributor today!
Wow that is pretty. Great finish.
Bernie
Never put off until tomorrow what you can do the day after tomorrow.
To succeed in life, you need three things: a wishbone, a backbone and a funnybone.
thats a good looking HF......love the finish....did you polish or just wipe on????? can you explain the prosess
Dave
IN GOD WE TRUST
USN Retired
David: I just put the poly on with a 2" square cottom cloth. T-shirt when avaliable or gun cleaning patches when no rags are avaliable. One coat a day and I wet sand with 400 grit black automotive sandpaper between coats. After I have the gloss I'm after and the defects are all out I set the piece aside till the poly is cured. (when you can no longer smell it close up it is cured). I then use the 3 wheel buff and consider it finished...Bill...
Thanks Bill I will have to give that a try
Dave
IN GOD WE TRUST
USN Retired
Bill,
I like the lip/mouth, with Steve's suggestion to round it a bit. And might have made the base a little smaller. Nit picking aside, beautiful wood, shape, and finish.
Richard in Wimberley
Richard i sure did not notice any nitt picking! I agree after looking the foot is a bit too big. As far as the lip again I agree but just messing with different forms right now. Thanks all for the constructive critisism, it is taken the way you intended...Bill...
That sure is pretty. I don't think I have any criticism. Looks perfect.
Last edited by alex carey; 02-05-2009 at 9:55 PM. Reason: spelling error