Hello All...
I just completed this, solid maple..Finished with padded on shellac, bed bolts for all the joints...Thought it came out pretty good!
Hello All...
I just completed this, solid maple..Finished with padded on shellac, bed bolts for all the joints...Thought it came out pretty good!
Last edited by Nate Rogers; 02-14-2009 at 6:16 PM.
Looking good Nate!! Are the posts glue ups or were you able to find some that thick? Nice job!!
If at first you don't succeed, look in the trash for the instructions.
Very nice!
Nate,
I think it came out pretty darn good too!! Have you taken it for a test drive yet? Did you create a slat system with a middle support?
It did come out good. Well done Nate.
Dewey
"Everything is better with Inlay or Marquetry!"
Good looking bed Nate.
Dave
IN GOD WE TRUST
USN Retired
Nate,
Nice looking bed.......
Army Veteran 1968 - 1970
I Support the Second Amendment of the US Constitution
That is really nice. LOML has a bed frame on the wish list, I just haven't gotten the confidence to move to something that large yet.
good job
fledgling weekend warrior
Great looking bed. Nice Shaker feel to it. And plenty of room to get underneath it. Nice job.
Nate -
Well done! The headboard grain pattern turned out very nice.
Ted
Nice clean design and great work, Nate!
--
The most expensive tool is the one you buy "cheaply" and often...
Very nice. Simple and elegant. What are going to cover the bed bolts with?
Ted,
That is basically what I did, I ran a piece that was roughly 6/4 thick and 6 inches wide down the center of the bed and mortised it into the head and foot board. I also put a adjustable foot on the bottom of the board to give it some extra strength and stability. It is definitely a solid bed!
Nate