Results 1 to 3 of 3

Thread: Grain Orientation for a table

  1. #1
    Join Date
    Jan 2009
    Location
    Niagara, Ontario
    Posts
    657

    Grain Orientation for a table

    I see some completed and wonderful table projects shown on SMC. Some tables are built with grain following the length of the table, others use shorter boards for the glue ups and so the boards are arranged width wise.

    Other than the obvious (easier selection of the shorter boards) what are the design considerations?

    Thank you in advance.

  2. #2
    Join Date
    Mar 2006
    Location
    SoCal
    Posts
    22,494
    Blog Entries
    1
    Most woods will expand and contract more across their width.
    "A hen is only an egg's way of making another egg".


    – Samuel Butler

  3. #3
    Join Date
    Apr 2008
    Location
    The Little Tennessee River near Knoxville.
    Posts
    1,227

    Some design considerations

    One of them is what Glenn said "Most woods will expand and contract more across their width." That means if the grain follows along the small side there must be a lot more design considerations to compensate for it.

    Another consideration is that our brain finds that long narrow shapes, like the grain running the long way, is just more pleasing.

    Another thing is that if we took two tables of the same dimensions, say 2 ft wide and 5 ft long the one with the grain running the long way would appear much longer and thinner while the one with the grain running in the short direction would appear shorter and wider.

    There is no right and wrong. It all depends on what kind of an effect you want to create. Do you want the room it's in to appear longer or wider?
    Retired, living and cruising full-time on my boat.
    Currently on the Little Tennessee River near Knoxville

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •