All,
I'm planing on building a tool stand similar to the Ultimate Tool Stand (http://christophermerrill.net/ww/pla...l_Stand_1.html) and am trying to figure out some miter saw dimensions. I've currently just got a 10" Craftsman CMS but am planning on upgrading in the very near future to a 10" or 12" SCMS. I need to figure out both the spacing on the top of the tool stand where the miter saw sits and the size of the opening in the cabinet where the saw is stored, but do not have access to a SCMS to pull some dimensions from so.... If any of you with a SCMS are sitting in your shop and would like to help a guy out, could you pull the overall length and depth dimensions (I'm not concerned about height) of your saw with the miter slide all the way to one side (shortest depth distance)? I'd like to finalize my design as soon as possible so that I can get a cutlist together and purchase some wood. Any help would be much appreciated!
Thanks in advance.