Does this product require stirring before spraying?
[OP]
Moderator
Does this product require stirring before spraying?
Member
Yes.
I've sprayed a whole bunch of it, and if I still sprayed my finishes I use a bunch more of it.
Marc
Member
They have thier own website and forum where all of your questions will be answered by a memeber or pro from the company.
Ken
Member
Yes, it must be stirred to mix the flattening agents that have settled to the bottom of the can. If you don't stir them back in you will have a gloss finish.
Moderator
In most cases, finishes should be stirred well before using, and anything with flatting agents must be stirred thoroughly. Otherwise, your "semi-gloss" will be...gloss.
--
The most expensive tool is the one you buy "cheaply" and often...
[OP]
Moderator
I kinda figured, but I've used satin polycrylic b4 from Minwax without stirring and it was fine - and that was off the brush. I thought the flatteners might have a density closer to water or the glycols used in the waterbased stuff, and hence would be less prone to settling out. I know differently now. Thx!
Posting Permissions
Reply With Quote