Most of the verticle recommendations ive seen show the 4x8 accomidated narow side down. My ceiling is slightly under 8' and the garage door rail would make it impossible anyway...
I was thinking of putting on the long edge with the 41" triton racks for lumber above it. I was thinking i could possibly put a slight taper on 2x4s bolt to the wall to insure they were only slanted a couple of degrees to avoid warpage?
Is this as ok an idea as the verticle? Should i use some caul meacanims to pull them into the wall to insure no warp in either direction?
thx
-brad