Did a quick search but will ask again
is thermo set polyester as used in a plastic gun grip safe to laser?
Did a quick search but will ask again
is thermo set polyester as used in a plastic gun grip safe to laser?
It should be but you really have to look at the MSDS for that manufacturer to be sure. I checked one for Crane Composites and it has fiberglass reinforcement added, but should still be fine.
Sammamish, WA
Epilog Legend 24TT 45W, had a sign business for 17 years, now just doing laser work on the side.
"One only needs two tools in life: WD-40 to make things go, and duct tape to make them stop." G. Weilacher
"The handyman's secret weapon - Duct Tape" R. Green
Polyester is fine...
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
Polyester (mylar and other trade names) are one of the safer materials to use. Downside is they won't stretch like vinyls. The metallic engravable material usually has a polyester base.
Mark
ULS X-2 660, Corel X3, Haas VF4, Graphtec vinyl cutter, Xenetech rotaries (3), Dahlgren Tables, Gorton P2-3, New Hermes pantographs (2), and recently, 24" x 36" chinese router. Also do sublimation, sand blasting, & metal photo. Engraver since 1975.