This tape works great and you only need to use a small amount of it. Remove it immediately after use. You kind sort of "roll it off" with your fingers. Clean up the residue with lacquer thinner.
http://www.uline.com/BL_6002/3M-Gene...ispenser-Rolls
I use the the 3M 969 – Heavy duty.
A less expensive but almost as good alternative from the same company is this one:
http://www.uline.com/BL_3101/Uline-A...nsfer%2520tape
The industrial or the heavy duty in the link above will work well. The heavy duty is a little stronger and a little harder to remove.
As someone else already said, you don't need to use a lot of it. Practice on some scrap until you get the feel of it.
If you're doing very much of this type of work, the tape dispenser guns are a big help!
Stephen Edwards
Hilham, TN 38568
"Build for the joy of it!"