32"drawer slides

[michael foster]

I am building a storage unit under a step that requires 32" full ext slides.some of the drawers may hold less than 75 lbs but some may hold in excess of 100 lbs. I have found some from Accuride but they are 150.00 a pair .Are there any other good quality products out there at a better price. I am also searching for slides for a cabinet that is designed with out handles. I have seen what Blum has to offer but there again the price is high. Any leads would be appreciated.

Michael from Barbados........

[Byron Trantham]

Try www.dlawlesshardware.com

[Paul Johnstone]

I got some K-V full extension slides from http://wwhardware.com/ The were rated at 100lbs.

If you can use 28" drawer slides (your case is 32" deep).. The ones below are $13.22 a pair. that's what I used. Since they are full extension, you can still make your drawer 30 or 32" long.. just the back part won't be fully extended. Whole drawer is still usable.

http://wwhardware.com/catalog.cfm/Gr...%23%20Class%20

[Jamie Buxton]

I am also searching for slides for a cabinet that is designed with out handles. I have seen what Blum has to offer but there again the price is high. Any leads would be appreciated.

Blum's Tip-on device works well, and doesn't consume much room. You do have to use it with Tandem slides, and they're a little pricey. However, they're worth it IMHO. Good action, high quality. That's the way I'd go.

For lower cost, you can use the old drawer pusher (http://wwhardware.com/catalog.cfm/Pr...D/BX1021%20L32). A drawback is that they consume a couple of inches of drawer depth.