I have a customer who is searching for this type of aluminum to be CerMarked. However, I've been unable to find it. I've found something close but it's anodized and doesn't have the slots cut or the curve.
I have a customer who is searching for this type of aluminum to be CerMarked. However, I've been unable to find it. I've found something close but it's anodized and doesn't have the slots cut or the curve.
Tim
There are Big Brain people & Small Brain people. I'm one of the Big Brains - with a lot of empty space.- me
50W Fiber - Raycus/MaxPhotonics - It's a metal eating beast!
Epilog Fusion M2 50/30 Co2/Fiber - 2015
Epilog Mini24 – 35watt - 2006 (Original Tube)
Ricoh SG3110DN
- Liberty Laser LLC
The customer is asking for a quote by the case - engraved.
Tim
There are Big Brain people & Small Brain people. I'm one of the Big Brains - with a lot of empty space.- me
50W Fiber - Raycus/MaxPhotonics - It's a metal eating beast!
Epilog Fusion M2 50/30 Co2/Fiber - 2015
Epilog Mini24 – 35watt - 2006 (Original Tube)
Ricoh SG3110DN
- Liberty Laser LLC
I would shop it around to machine shops in your area.
Bill Jermyn
Waterloo Engraving
Kitchener, ON
Epilog Legend 32EX 75 Watt, Corel X3, Photograv, Wacom Intuos 3 6X8 graphics tablet
You should be able to bend them yourself, so I would just look for a local laser or waterjet shop to cut them out. A (modern) waterjet could cut them out stacked 10 high in short order.
Jack
Why don't you call Frank at Chewbarka. He doesn't have to anodize everything.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Do you have a drawing? I will quote them for you in quantity. I work for a custom metal stamping company.
Steve Costain