The presentation box attached may be of use. It is designed for slate 304mm x 234mm x 7mm, and I used .45mm thick cardboard.
However layout can be changed to suit different sizes.
Stephen
The presentation box attached may be of use. It is designed for slate 304mm x 234mm x 7mm, and I used .45mm thick cardboard.
However layout can be changed to suit different sizes.
Stephen
Thanks Stephen
I am sure I will make use of this
Carrol
Epilog Mini 24 45w; Photoshop, CoralDraw and just about anything else that will work for me!
Thanks from here too! I'm sure I'll have lots of uses for this too.
Stuart Orrell
LS6040 40W, CS3, Lasercut 5.1, SolidWorks,
Carrol, Stuart that's good.
Steen image attached.
Stephen