I got my first job engraving door signs for a Dr.'s office. They also want me to install them, is there a standard height for signs?
I got my first job engraving door signs for a Dr.'s office. They also want me to install them, is there a standard height for signs?
Bob,
ADA Door Signs should be installed at 60 inches to the center of the sign on the latch side of the door. I install mine about 9 inches from the door frame edge to the edge of the sign.
Thanks but these are not ADA signs. Just door signs!
If it is a smooth faced door 60" still should be about right. If it is a 6 panel door you may have to place where it works the best.
Al
40W MII W/Rotor
Camaster Stinger III, Vectric Aspire
Back up Vinyl cutter
Roland 54" print/cut
Laminator
Strip heater
Lasermaster 8.5, LXI Master Plus, Corel X4, Photograv, design shop pro
Knight DC16, DK3 Mug Press, Hix HD400D, GX7000
Embroidery
Hot stamping
Bob:
Is this a public building? You may need to check with the local authority. They may have to be ADA compliant. I been in lots of doctor's buildings and offices and I have never seen one that didn't have ADA signage.
Epilog Legend EXT36-40watt, Corel X4, Canon iPF8000 44" printer,Photoshop CS6, Ioline plotter, Hotronix Swinger Heat Press, Ricoh GX e3300 Sublimation