[OP]
Member
Hi !
I'm having problem with a basic process.
As usual i did process a image with gold method than i send it to laser for glass engraving.
Laser acts like i sent hairline drawing and does nothing !
I've followed same process many times before without problem, any ideas ?
Last edited by onur cakir; 05-28-2009 at 12:16 PM.
Member
Onur,
the only time time I have had something like that happen was when I didn't have the correct page size entered in the driver.
Try a restart on your computer and laser, sometimes that happens if the file glitches.
Marty
Martin Boekers
1 - Epilog Radius 25watt laser 1998
1 - Epilog Legend EXT36 75watt laser 2005
1 - Epilog Legend EXT36 75watt laser 2007
1 - Epilog Fusion M2 32 120watt laser with camera 2015
2 - Geo Knight K20S 16x20 Heat Press
Geo Knight K Mug Press,
Ricoh GX-7000 Dye Sub Printer
Zerox Phaser 6360 Laser Printer
numerous other tools and implements
of distruction/distraction!
Member
I can't see any thing wrong with the file, it should engrave.. probably just a hicup in the software someplace..
Epilog 24TT(somewhere between 35-45 watts), CorelX4, Photograv(the old one, it works!), HotStamping, Pantograph, Vulcanizer, PolymerPlatemaker, Sandblasting Cabinet, and a 30 year collection of Assorted 'Junque'
Every time you make a typo, the errorists win
I Have to think outside the box.. I don't fit in it anymore
Experience is a wonderful thing.
It enables you to recognize a mistake when you make it again.
Every silver lining has a cloud around it
Friend of the Creek
This is Mission Control from Houston and I agree with Bill and Martin....
REBOOT and see if that works. Make sure you do clean reboot by either unplugging your CPU or shut off at your surge protector and start your countdown from T-10. Hope this works for you and ...
Have a Blessed day,
Michael Kowalczyk
Laser-Trotec Speedy II 60 watt with 9.4.2 job control and will soon upgrade to JC X
Corel Draw Suite X6, FlexiSign Pro 8.62, AI CS3 and Lasertype6
CNC Routers-Thermwood model C40 with 4th axis. Thermwood Model 42 with dual tables and dual spindles with ATC for high production runs,
ArtcamPro 2010_SP4, EnroutePro 5.1, BobCad v21 & v24, Aspire v8 and Rhino 5.
FOTC link
http://www.sawmillcreek.org/friends.php?cp=210&lp=0&t=0&q=
Posting Permissions
Reply With Quote
