Results 1 to 4 of 4

Thread: Pencil Sharpener Inlay system.

  1. #1
    Join Date
    Apr 2009
    Location
    Russellville, Arkansas
    Posts
    34

    Pencil Sharpener Inlay system.

    I remember about 10 or 15 years ago seeing an advertisement for a special drill bit that drilled a tapered hole that matched the angle of a pencil sharpened point. It was used to make small circular inlays by drilling the tapered hole, using a pencil sharpener to put a point on a dowel, glue the sharpened point into the hole and saw it off and sand flush. The resulting inlay could be made different sizes depending on the depth of the hole. I can't seem to find it anywhere now, does anyone know where I could find one of these?
    Steve Garrison

  2. #2
    they are sold in either the Lee Valley, Woodworker Pro, or Vertias catalogs.
    S.M.Titmas.

    "...I had field experience, a vocabulary and a criminal mind, I was a danger to myself and others."

    -Anthony Bourdain

  3. #3
    Join Date
    Apr 2009
    Location
    Russellville, Arkansas
    Posts
    34
    Thanks Sean, I didn't think to look in Canada.
    Steve Garrison


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •