Stopping ULS systems from resetting when powered on

[Joseph Tovar]

Hi All,

Does anyone know how to stop the ULS VL-200 from resetting/homing everytime it powers on. This is only when my PC gets shut off. If the PC is on and the laser is powered off, then on, it stays in it's current Z location.

If the PC gets turned off for the night and then back on in the morning and then I power on the laser, the Z axis resets and moves the table to the bottom.

It's not a big deal, but annoying since I usually want to continue what I was doing from the night before without having to re-zoom.

Thanks!

[Rob Bosworth]

Joseph, I am pretty sure that you cannot turn that homing function off on your VLS 200. I worked on one a few weeks ago, and could not toggle the re-set off.