Okay, I've been working on this refinishing project and I'm closing in on the home stretch. Sprayed my first finish of EM6000 and I have to admit I love it. The finish is fabulous, except for the top. It's an old buffet and this top has been fooling me through the whole process.
The old finish was like iron on the top - yet it was in horrid shape. In one spot, the finish refused to come off, when it finally did; and was stained and sealed, I could still see the area - almost like oil was still pooling in that area.
After my final coat of EM6000, this spot was yellow and flaked off - so easily just dragging a cabinet scraper across the top with no down pressure from me, took it off as though I'd sprayed it on wax paper. The rest of the top was only slightly better. I'm back down to bare wood.
I think the EM6000 is out for the top - but rest it's fine, any recommendations for cleaning, for finishing etc.
Thanks for any input...