My drill press is too short for sitting on the ground and too tall for a normal cabinet so I made a roll-around cart.
This is my first attempt a cabinet with drawers and it includes a lot of "firsts" for me. I did bridle-like joints and moritise/tenon joints for the carcass. The mortise/tenon joints were probably a bad idea because of the direction of the grain. For the sides I used pegboard to hold things like screwdrivers etc.
So why would I build a cabinet like this when ply works fine? Because I had extra wood lying around and no extra ply .
I also did something really silly for the drawer pulls: I dovetailed them into the top of the drawer fronts.
Mostly I was just playing .