Results 1 to 6 of 6

Thread: The possibilities of cutting metal

  1. #1

    The possibilities of cutting metal

    Good morning all,

    I realize that your laser machines are normally capable of doing engraving work, but is it possible to cut 1/8" tool steel with your machines?

    I am about to embark on a rather lenghty project that will require approx 36 pcs of tool steel cut to tolerance. The thought of being on the end of a hacksaw and files for hours on end is not one that appeals greatly to me.

    Let me know what you think, and if you cannot do this, if you would be so kind as to point me in the right direction, I would be most appreciative.

    Roger
    South of Chicago

  2. #2
    It is possible to cut steel with a C02 laser, but not the kind that most of us own. If I recall correctly, the kind of laser needed to cut steel puts out 2,000 or more watts and costs $250,000...

    It seems to me that a much more cost effective alternative would be for you to find a machine shop and have them take care of this for you using a mill, lathe, plasma cutter or something like that.
    Mark Dickens
    Precision Laser Art, LLC
    www.precisionlaserart.com

  3. #3
    Hello Roger,

    Yag is the laser word of the day. Yag Lasers are the main metal cutting lasers.
    CO2 lasers under 1000watts are unable to cut any type of metal. Unless they are the laser Oxygen or Nitrogen assisted ones.
    Unfortunately I don't know of any manufacturers that sell either.
    Kevin W. Huffman II
    Pinnacle Laser

  4. #4

    Plasma is your baby!

    Hey Roger,
    I agree, unless you have a company close to you that has a large YAG laser, look for someone, usually a small fabrication shop that can do the work for you with a Plasma Cutter, or WaterJet. If you are looking to do a lot of this kind of work and need to make money off of the machine you can get a CAD-CAM Plasma cutter for around 10 grand that is very much a money maker like the lasers are!
    Michael

    Nighthawk Arts

  5. #5
    Join Date
    Sep 2004
    Location
    Maui, Hawaii
    Posts
    182

    A research source

    Roger,
    Here is a website I came across while researching my laser. I think that can be helpful. http://www.globalspec.com/ They provide specs on a lot of scientific and manufacturing equipment and accessories.
    Once again I am amazed by Kevin Huffmans knowledge. YAG lasers are your next step.
    Do a search for metal cutting lasers if you have not already and you will be amazed at what you find.


    Chuck Burke
    Pacific LaZer Works.

  6. #6
    Thanks all for the info. Looks like I have a lot of research to do to get to where I want to be.

    Roger

Similar Threads

  1. Seriously thinking about picking up welding
    By Scott Coffelt in forum Off Topic Forum
    Replies: 30
    Last Post: 07-05-2004, 10:46 PM
  2. cutting board glue up
    By Mark Rios in forum General Woodworking and Power Tools
    Replies: 7
    Last Post: 06-01-2004, 8:57 AM
  3. What I learned about cutting angle iron with a circular saw
    By Don Farr in forum General Woodworking and Power Tools
    Replies: 14
    Last Post: 10-23-2003, 1:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •