Maybe my brain is passing gas, but I need to cut a 60 degree back bevel (cleat)on an 8ft long board. Of course TS only tilts 45. Any suggestions.
Maybe my brain is passing gas, but I need to cut a 60 degree back bevel (cleat)on an 8ft long board. Of course TS only tilts 45. Any suggestions.
Cut a 30 degree on the other side of the board.
How wide is the board? You could run it on edge with the TS set to 30.
Its 5" wide.
Got it Had to stand on side. Didn't feel 100% safe but worked out ok.